Share your Drawers with kitchen setup

[Cbates]

Hey guys,
Currently designing drawers with integrated kitchen setup for the back of the patrol when I go camping. What have you guys done?
Would appreciate any photos etc
Thanks guys!

[NissanGQ4.2]

Hi mate, I have moved your thread to Questions related to DIY projects

Cheers

Toddie

[BigRAWesty]

Mid way threw mine.

Fridge will sit on top left, above a short draw for recovery gear and under that will be a pull out bench top / table, the on the right is the full depth food and groceries draw.

Kallen Westbrook
Owner of
Westy's Accessories

[Cbates]

Mid way threw mine.

Fridge will sit on top left, above a short draw for recovery gear and under that will be a pull out bench top / table, the on the right is the full depth food and groceries draw.

Kallen Westbrook
Owner of
Westy's Accessories

Looks good mate are you using slides or bearings?

[Cbates]

I'm gonna do a similar table slide but thinking aluminum u channel and slide a piece of ply into that.

[Cbates]

this is a quick sketchup of what im thinking

[BigRAWesty]

A very hard wearing nylon called UHMW..
A 3mm thick bit on both sides and it slides like its in ice...

Kallen Westbrook
Owner of
Westy's Accessories

[Cbates]

Wow I might look into that! Seems like a cheaper option!

[choochie]

That uhmw strip looks good westy. Where would I source that?

[BigRAWesty]

Pretty sure the father in-law got it from banner (good hardware store). Comes in a rod form to. Cut it with a jig saw or band saw.

Kallen Westbrook
Owner of
Westy's Accessories