-
14th March 2013, 12:25 AM
#1
Patrol Guru
Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
Well I have finally bought the new valve body, has anyone had any experience putting one in, I hope to have it either Friday or Monday from wholesale automatics, i reckon it should only be an hour or so to put it in... Any suggestion would be good.
I am also installing a temp guage and lock up kit at the same time.....
Anyone know what temps the auto trans should run at??
Scotty
-
-
14th March 2013 12:25 AM
# ADS
Circuit advertisement
-
14th March 2013, 09:18 AM
#2
Patrol God
Re: Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
It was easy for me because I got an auto place to do it lol. But my box was out and in a million bits in his bench anyway so it made sense.
Once fitted you will enjoy it thoroughly. Man they're awesome aren't they Scotty?
FanTapstic!
Hello from Under Down Under!
-
-
14th March 2013, 09:53 AM
#3
Patrol God
Re: Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
Originally Posted by
Great Southern Camping
Too right mate - quick and sharp changes, heaps better kick down in power mode, and runs cooler.
Scotty (Bigrig)
Great Southern Camping
www.gscoffroad.com.au
Yeah I'm talking gravel roosting kickdowns! haha:-)
FanTapstic!
Hello from Under Down Under!
-
-
20th March 2013, 10:07 PM
#4
Patrol Guru
Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
Help..... I am trying to install this... The instruction says remove springs and replace spring d... Do I discard the other springs or do they go back in???
-
-
20th March 2013, 10:36 PM
#5
Patrol Guru
Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
Anyone able to help here.. Also there are 4 accumulators and 3 springs is this correct
-
-
20th March 2013, 10:54 PM
#6
Rotaredom
Buy reading this thread Scottie, am I correct in saying you buoght a kit of Wholesale not an actual Heavy Duty Valve Body???
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
20th March 2013, 11:01 PM
#7
Patrol Guru
Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
Yeah that is the case.. Sorry for the mis understanding
-
-
20th March 2013, 11:02 PM
#8
Patrol Guru
Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
Well I think so I received what wholesale call a heavy duty nomad valve body
-
-
20th March 2013, 11:03 PM
#9
Patrol Guru
Heavy Duty “Nomad” Nissan Patrol Valve Body Assembly
I have never opened the auto before.. Always thought better of it.....
-
-
20th March 2013, 11:11 PM
#10
Rotaredom
So you go what's shown in this picture??? http://www.automatictransmission.com...sp?NewsId=8169
Scotty, I'm about to hit the sack so will get back on this 2morrow.
But I thought it was just a straight pull out old valve body and put new one in.
Last edited by NissanGQ4.2; 20th March 2013 at 11:17 PM.
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-