-
2nd February 2013, 11:11 PM
#1
ZD30 Gu Patrol spool Up Rate
Hi all,
Chasing some information, I have just installed a gen Garrett Turbo to my ZD30, and taken if for a run. I must say its a 100% improvement on the original, anyway It lacks power i mean the turbo does not spool up until the revs hit 2750 rpm this was the same with old turbo.
After reading some of the forums and seeing turbos spooling up at 2000 rpm i am guessing i have another problem or is this only being achieved after completing the EGR mod, as i am wait on the dawes value and 3 inch exhaust to arrive.
PS
at the moment with the new turbo installed i am showing 14psi @140 kph with no mods but the spool up rate i would like to start at around 2000rpm
any help or suggestions here
regards
Last edited by Gu01patrol; 2nd February 2013 at 11:17 PM.
Reason: heading
-
-
2nd February 2013 11:11 PM
# ADS
Circuit advertisement
-
3rd February 2013, 09:15 AM
#2
Patrol God
Hi mate Might want to pop over to the intro section first.
Its just something the forum asks of all new members
You'll get a much better response as well, Cheers
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-