2.8TD GR major repair.

[Flying Torquewrench]

1 coarse - 2 fine

[Flying Torquewrench]

1 coarse - 3 fine

[Flying Torquewrench]

1 coarse - 4 fine

[Flying Torquewrench]

And finally, 1 coarse - 5 fine.

It has a lot more settings, but there was no point in trying them all as it was only be sheet metal that I am welding

[Flying Torquewrench]

Also tried a 90 degree corner. must say that I was quite suprised. However this was clean metal and not the rusty old metal on the car.

[Flying Torquewrench]

The front panel was so rusty in places that welding it on the car was proving difficult. To make the job easier, I removed the panel. Here I am removing the spot welds.

[Flying Torquewrench]

With the front panel removed.