-
14th January 2013, 02:58 PM
#1
Patrol God
Distributor cap, repco
Gidday all, I was just cleaning the engine electrics and setting the spark plug gaps, and I noticed that the carbon brush in the top of the dissy cap is cactus. I was quoted $35 for a repco cap. Has anyone used them, are they up to the job; water, heat, vibration etc?
And while I'm here, I found a printing error in my Haynes manual. Page 1-3, It says the 3ltr spark gap is 0.8mm to .19 mm. It should be
0.8 mm to 0.9mm, according to the owners manual.
My advice is: not to follow my advice.
-
-
14th January 2013 02:58 PM
# ADS
Circuit advertisement
-
14th January 2013, 04:04 PM
#2
I've been running a repco one for about 6 months now, is it a fuelmiser ?? Haven't had a problem yet
-
The Following User Says Thank You to dreamrig92 For This Useful Post:
mudnut (14th January 2013)
-
14th January 2013, 05:28 PM
#3
Patrol God
Dunno what brand it is, yet.
My advice is: not to follow my advice.
-
-
15th January 2013, 07:29 AM
#4
Lol, thats a pretty good typo you found there.
-
-
15th January 2013, 06:49 PM
#5
Patrol God
Originally Posted by
TurboOne
Lol, thats a pretty good typo you found there.
Yeah, .19mm, may as well hit the electrode with a hammer and close the gap. :-p
My advice is: not to follow my advice.
-