-
23rd December 2012, 10:52 PM
#1
02 GU Manual to Auto conversion
Hey
I just rebuilt my zd30 and now in the process of converting it from manual to automatic. I have done heaps of searching but cant find much information at all about doing this conversion. Has anyone out there done this or have a pretty good idea how its done? I have the auto box which just bolts straight onto the existing bellhousing, have the interior parts to change over - pedal box for brake, center console shroud, tbar. I dont have the wiring harness that connects to the bottom of the tbar (which runs to the park/ neutral sensor if anyone can help?) I am also changing the auto box to run a nomad valve body and compushift ll auto computer. is there anything i may have overlooked? any info will be greatly appreciated.
-
-
23rd December 2012 10:52 PM
# ADS
Circuit advertisement
-
24th December 2012, 12:29 AM
#2
BIG & BALD
You might want to put up an introduction in the intro section of the forum, might get a few more responses.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
27th December 2012, 10:33 PM
#3
-