Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Mate, I have been wanting and planning this for ages. I have even drawn up a 3D digital model of the whole thing using SketchUp 7. If only I could find the time to get the job done! Here is a jpg. image of the model.
looks good Shayne, only change i would make is to put a top in it to stop stuff bouncing out. Which it did on my 1st attempt
Nice one mate, hadn't thought of that! Lol Will have to do that. I was planning on fitting a light in it anyway so that will give me a location to mount it. I'm also going to wire up a lighter plug in the dish section to power stuff like laptop, charge phone and batteries, etc. Should make life much easier and the cabin cleaner!
yeah know how u feel that's why i put the lock on it
Been gunna start mine, but can't work out how to get the front panel off, does it just pull off or is there something holding it on?? yeah, I know, dumb arze eh?
You need to take the main glovebox out & then reach up with a short phillips head screwdriver to remove 8 screws. 4 at the top of the panel & 4 at the bottom, then saw out the backing & start building. If you need pointers try out this site grungles.com.au It is a personal site of a mate showing all his mods in detail.
Watch out there's a Poo "Yota" lurking in the shadows !