Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Did a search but can't really find the info I require, I scored an old warn winch off my in-laws which I want to start working out how to attach it behind my alloy bar, From what I have seen I have 2 options: I can purchase a universal winch mounting plate from tigerz11 or I can buy a winch cradle that suits the car.
Now there is a significant price difference between the two $70 x $300 for the cradle. I have a friend who could weld the tigerz plate in for me, but I've been researching and it looks like the plate is only 4mm thick? Will 4mm be sufficient to allow recoveries of a patrol?
I could buy the plate then get my friend to weld some more plate to it to beef it up more as well.
Price reflects quality there I think, if your mates a boiler maker or like I'm sure he'd be able to gusset the 4mm one.
Why not get him to make a new one , what bullbar do you have is it factory bullbar? Have seen them cheaper than $300
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Hi threedogs thanks for the reply, I have put the nissan alloy one on and am planing on opening up the slots to suit, Can you point me to where you have seen the cradles for less then $300?
ERIC ID LIKE TO SEE YOU STEER CLEAR OF THE $70 ONE AND HUNT AROUND FOR THE CRADLE
WHICH WILL BOLT STRAIGHT IN,SEEMS LIKE A LOT OF TROUBLE TO STRENGHTEN THE OTHER ONE
AND TO WELD IT IN ,IN M,O,P IS NOT A GOOD IDEA
From all the chat about Tigerz I'd steer clear......particularly if you're talking about a potentially hazardous situation such as winching.
You don't want that 4mm cradle giving way when you're stuck on an awkward angle out on South Bassalt Knob or somewhere like that......
It's a long way to the bottom!
Cheers,
Drew.
Sent from my iPhone using Tapatalk
1997 GQ Patrol RX, TB42E. Mods: OME 2" lift, 33" BFG KM2'S, ARB winch bar & reconditioned X9 Superwinch, IPF 900 spotties HID conversion, ARB side steps and scrub bars, Kaymar rear step & spare wheel carrier & jerry holder, Rear 55W LED worklight, Safari Snorkel, 147L LRA tank, Extended diff breathers, dual batteries, GME UHF, Home built drawer and fridge slide, ARB 60L fridge.
The guy who makes these cradles is a member on here. Named Toolman, you can try sending him a pm as I know it wasn't compatible with all alloy bars. Depends on the model you have.
Get your mate to make one from 6mm plate. You have the basic design from pictures and for $150 and a box of beer (potential cost, my rate anyway.. ) you'll have a solid cradle which will last a lifetime..