-
23rd July 2014, 03:04 PM
#211
Any updates mate??????
Been a while
-
-
23rd July 2014 03:04 PM
# ADS
Circuit advertisement
-
26th July 2014, 11:06 PM
#212
It is great to see someone being so completely thorough. That's dedication to detail that is not often seen. How did you deal with the rust inside the chassis rails and cross beams? I water blasted the inside as much as I could then sprayed the living daylights out of it with Fishoilene which is a great tried and true rust inhibitor. Its good for all hard to get to areas although I don't know if it is available in France.
Look forward to following your progress so the more pictures the merrier.
The end result should be amazing.
Lee
-
-
10th December 2014, 10:00 AM
#213
Originally Posted by
Petit caillou
I love these sort of post
-
-
24th January 2015, 04:37 PM
#214
Expert
Hi all,
You thought I was dead ?
NO, I come with a new project !
After researching this Gevarm Cournil 1978 it seems 5416 km on the clock, a Jeep T84 gearbox instead of the original gearbox UGO T18 borg-warner, there corrosion, but only to surface corrosion, a torn tarp to change, a bent door, scratched windshield breaks, the engine reattach to new media, it was time to start working to extend the life of this small vehicle, he made a trip to England and returned to 25 km from the house .
Once the purchase is made the way back was good, it was loaded on a carrier car.
I'll try to tell the story of this renovation in stages, taking pictures, I would have probably have questions, you can also have too, so we can share our passion, please.
The day of purchase
already ride
first disassembly, remove the cloth, the doors, hood and windshield
Here it is almost naked
Help the state of the gearbox !!!
There was even a mouse nest inside
Continue disassembly
The interior of the transfer case appears in good condition
The tank is removed and emptied
Begin treatment against corrosion
Following next time
Best regard's,
Petit caillou.
Last edited by Petit caillou; 24th January 2015 at 04:41 PM.
-
The Following 4 Users Say Thank You to Petit caillou For This Useful Post:
93patrol (12th February 2015), Clunk (24th January 2015), Parksy (26th January 2015), Woof (24th January 2015)
-
24th January 2015, 04:45 PM
#215
Dribble Master
welcome back mate, looks like a very small project you have there this time round. So, you'll probably have it all finished by Sunday?????? hahahahaha
-
-
25th January 2015, 07:59 PM
#216
Well done on the Nissan. If this new project goes half as well it will be fantastic. Bon chance. Cheers,
-
The Following User Says Thank You to monty For This Useful Post:
Rossco (25th October 2016)
-
26th January 2015, 06:54 AM
#217
Patrol Freak
welcome back! That gearbox looks nasty. Has a couple of chipped teeth by the looks of it. And straight cut gears. Noisy!!
IMO and should be taken with a grain of salt.
-
-
11th February 2015, 08:09 PM
#218
Great work love this thread keep up the fantastic work
-
-
11th November 2016, 07:37 PM
#219
Patrol God
This is the thread I was talking about @NissanGQ4.2
My advice is: not to follow my advice.
-
-
11th November 2016, 09:38 PM
#220
Dribble Master
Originally Posted by
mudnut
Tis a shame indeed, that's the trouble with uploading pics elsewhere the linking to here, which I do all the time too ......
I was looking for this thread too
-
The Following User Says Thank You to Clunk For This Useful Post:
mudnut (11th November 2016)