-
11th November 2012, 10:40 AM
#1
TD42T oil pressure sensor
hey guys ive got a gu with a 4.2td previous owner has stripped the thread were the oil pressure sender screws to the oil filter housing. ive cleaned the thread as best as possible and tried to loctite 567 & 577, but it still weaps, i have also tried to use rtv it held for a little while but failed in the end.
can any body elese suggest somthing im not to keen on replacing the oil filter housing just yet as im strapped for cash
cheers in advance
-
-
11th November 2012 10:40 AM
# ADS
Circuit advertisement
-
11th November 2012, 10:49 AM
#2
Expert
-
-
11th November 2012, 11:03 AM
#3
forgot to mention have also used thread tape
cheers any how
-
-
11th November 2012, 11:09 AM
#4
Expert
-
-
11th November 2012, 01:06 PM
#5
thought about a heli coil not to sure if it will work with oil pressure
-
-
11th November 2012, 05:19 PM
#6
Expert
Maybe best to talk to a mechanic, ask for quote and he may tell you what’s needed. I find the ARB staff to be very helpful here in Shepparton.
-