-
8th September 2012, 04:58 AM
#1
Expert
Rear panhard bar bushings
Anyone familiar with the rear panhard bar bushings on an 89 td42 lwb? I understand that one side is different than the years after in that it doesnt have that steel piece inside.
-
-
8th September 2012 04:58 AM
# ADS
Circuit advertisement
-
9th September 2012, 02:26 AM
#2
Expert
Both have steel sleeves inside but the one on the diff end is larger and goes over the large pin on the diff, the upper bush at the chassis end is smaller for a bolt through it.
The upper bushes on GU series 2 onwards are a different bush again on the wagons.
I love terra firma - the less firma the more terra
-
-
11th September 2012, 08:10 AM
#3
Expert
Originally Posted by
bordertech
Both have steel sleeves inside but the one on the diff end is larger and goes over the large pin on the diff, the upper bush at the chassis end is smaller for a bolt through it.
The upper bushes on GU series 2 onwards are a different bush again on the wagons.
Thought i heard that the large bushing was different after August 89. Thanks though man
-
-
20th October 2012, 06:26 PM
#4
Repco only list one part number
-