Petrol 4.2 GQ Turbo

[Neesmo31]

Hey all, just purchased a new (old) patrol, and thought i would say hello.

Basically has the following:
GT35R
MTQ manifold
Haltech E6K
Bigger injectors
Full 3" exhaust
Front mount intercooler
PWR radiator
Boost/airfuel guage
150L tank
2" dobinsons lift
15" mags
Shift kitted auto
Twin trans coolers, 1 underbody, 1 front mount
Winch Bar
UHF
10 stacker with alpine speakers
Extended engine oil pan
Towbar
ARB compressor, twin lines front and rear
Fridge plugs
Hella spotties

Getting 33" MTZ's this week and will be looking at revising the suspension soon.

[AB]

Welcome to the forum mate, feel free to ask any questions and join the conversations.

Sounds like a beast, feel free to show us some pics in the members rides section too.

Enjoy!

[patch697]

Welcome on board mate & I hope you enjoy the forum.

Some nice work been done to your Rig BTW...........post some pic up if you wouldn't mind please mate.

[Maxhead]

Welcome and enjoy the forum

[wildgu6]

Welcome to forum buddy.

Heaps of handy information on forum, great bunch of people with plenty of good advice.
And a few laughs along the way as well.
Sounds like a nice rig buddy,
Enjoy.

Cheers Pete

[Finly Owner]

Hi and welcome to Nissan Nut House

Tim

[Neesmo31]

Thanks guys, appreciate it.

Its pretty nana spec on the outside, which i guess is good. Getting 33's for it hopefully by the end of this week so i will be happy with that.

Long story short, bought the car on saturday, turbo failed at sunday lunchtime... it had a GT2876R on it making 202hp ATW on around 8psi, so thats off the car now, and I have been waiting for MTQ to build me a new dump pipe to match the 35R and the new manifold.

So i have been using this time to service it, done the following items:
New engine oil and filter
New plugs and plug leads
New distributor cap and rotor button
New front and rear diff oil
New transfer case oil
Coolant flush and new coolant
New air filter
* all penrite oils only *

Done all those and just a nice tidy up of everything, replaced all vacuum hoses and neatend/zip tied all wiring and hoses. Also got some dielectric grease and cut loose on the connectors in the engine bay.

Basically will have the turbo either today or tommorow, then its going to be fun times.

Thanks again.

[RustyNails]

Welcome along

Paul

[Bigrig]

G'day mate - look forward to a few pics!!

[Neesmo31]

Thanks guys - no your not really looking forward to pics... lol its a bit of a sleeper i guess.

NOTE: LINK REMOVED AS IT DID NOT WORK AND HAD A LINK TO PATROL4X4 WHICH IS CURRENTLY REPORTING MALWARE WARNINGS

REGARDS,

FORUM MANAGMENT