Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Hey all I am helping a bloke build Aluminium Tray Trailers & the other day I looked at 1 of the drop sides & thought a set of roller bearings would run pretty good in this.
Got the baby GQ a 1997 2.8TD RX Wagon Racetech EGT & Boost Guages Dobinsons coils 32in BFG KM2 M/T
Next I thought well I could do with a set of rear draws in the ol' GQ so I thought I'd post here as I go this is all just using the offcuts from the bigger 4.2mtr x 2.0mtr trailers we are currently building.
Heres some quick pics from todays start on draw setup.
The sides are 940 long by 300mm high after putting my 50ltr waeco on top I'll have bout 25mm spare height to get it out rear door of GQ then it will tilt so I can access hole fridge but thats later on.
Got the baby GQ a 1997 2.8TD RX Wagon Racetech EGT & Boost Guages Dobinsons coils 32in BFG KM2 M/T