GU Wagon Rock Sliders, Materials and step-by-step guide to build your own

[Lieney]

Thanx AB for attaching the document. Its nice to have skills, but even nicer to help others out.
Rear bar might be the next thing, but will see....
Thanx again AB.

[HammerBuilder]

Well done awsome build guide.
I am thinking of similar but am also thinking of using 1 of mine as air storage tank by making sure all pipes are capped & 1 drill hole to allow air in all pipes just my thoughts as all walls will be minimum of 3mm so should hold 100psi all day long if sealed correctly & fit a release valve incase of
severe damage under pressure.

[2TROLLFAM]

Even I can understand that !! WOW thanx for sharing..

[Lieney]

89gqpatrol4x4 90 degree bends is what I was after but bender was imperial & pipe was metric. Time restraint made angle easier option but mandrel bend was preferred. Rear bar hopefully in few months but available time is hard to find while juggling family & work

[krbrooking]

Thats an AWESOME build and pdf man great detail and info has definitely inspired me to plan my own/ use most of your info. lol!!!

[spikegorman]

thanks for good info

[Rip'n'Shred]

Great write up mate, well done.

[vk3mnm]

That's a great PDF thanks for sharing mate.

[Robo]

Very Nice indeedy.
Must say nice thread.
Nice build, and
Brilliant write up to boot.

Makes me want to "One day I'll have a crack at it to".
printed a copy for the misses to find !!.
nice to have a real work shop ya lucky so and so.
congrats

[2TROLLFAM]

I'm on my phone and when I try to open the attachment - this comes up?????ImageUploadedByMotorculture1399281368.350894.jpg
I've looked at before but that was awhile ago