GU 2.8 front crank bolt tension?

[the ferret]

Hi Guys, does any one know the tension for the crank bolt at the harmonic balancer on the td 2.8 diesel?

[Chops]

This should help you out Ferret.

[the ferret]

Thankyou ever so much, but I was after the tension for the td 2.8, the pdf is showing the sd33, sorry ta be a pain!!

[Chops]

No this is actually the TD 2.8 indicated by the TD in the box at the top right of the page. This page was taken from the GU Service Manual.


Edit: I got it from this Service Manual List. Dont bother clicking on anything, its only a screenshot of the Manual Index Page.

[the ferret]

Nah, they must have the wrong page, unless I'm doing something wrong.
The 2.8 diesel has a 14mm bolt and a flat washer, whereas the pic shows a nut and a cone as on the sd33s? again my apologies if I'm missing something here!!

[Chops]

I have a feeling that may have been the 4.2, not the 2.8. Though it definitely is the TD model. I could of sworn it was the TD2.8 page I was looking at.


Check this picture out and see if it looks familiar. The last thing I want to do is give wrong information.
This Service Data page is taken from the same manual, so I'm assuming 2.826 is the correct displacement.

[the ferret]

Yep, EM-46 is the correct page, that is the GU 2.8. with the bolt and flat washer. The other one is the sd33 series, with the cone and the nut.
Thankyou very much for taking the time and trouble to help me out

[the ferret]

I have a feeling that may have been the 4.2, not the 2.8. Though it definitely is the TD model. I could of sworn it was the TD2.8 page I was looking at.


Check this picture out and see if it looks familiar. The last thing I want to do is give wrong information.
This Service Data page is taken from the same manual, so I'm assuming 2.826 is the correct displacement.

Yeah I think that is the 4.2 with 7 mains, the sd33 has 5, cheers.

[Chops]

The other one is the sd33 series, with the cone and the nut.

No problems, happy to help, glad I got the right page, however NONE of these were the SD series, as they are all taken from the GU Service Manual. The Service_Manual_List PDF document above shows where these pages came from.

[the ferret]

Yep thanks again, my bad, it looks so much like the 33, but I knew it wasn't the 2.8, I'm in the picture now tho Cheers for your help.