-
6th June 2014, 10:35 PM
#31
GU This week.
T/d SV damper
T/dog adjustable panards done.
Superior adj drag.
NGK Glow plugs.
Fuel filter.
Power steer fluid yuk,
replaced that drove 100ks, drained again now synthetic oil .
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
-
6th June 2014 10:35 PM
# ADS
Circuit advertisement
-
7th July 2014, 03:47 AM
#32
Kenwood 2din and reversing camera.
Mod air filter box to increase size of outlet, now full 90mm pipe, no restriction any more, under $20.
It's not pretty but does the job well.
New elec aerial mast and service it's gearbox.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
-
30th July 2014, 04:39 AM
#33
Fitted Superior tierods and bar.
Wheel align and rotate bal etc.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
-
24th July 2015, 02:09 AM
#34
Humm been a yrs since I updated.
older and rounder!
x2 reversing camera.
roof racks.
elec brake controller.
tmic ordered hpd 450x300x76 with fan & temp controller.
o/haul alternator.
fitted 100w 4300k hid's in spotties, very good,and low flare with rd signs, nice outcome.
been a very busy year time I got up and wound the wick up on pat.
tax check soon, and possibly a new air box & turbo!.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
-
24th July 2015, 05:25 PM
#35
Patrol God
All good but where's the pics
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
24th July 2015, 05:58 PM
#36
Originally Posted by
threedogs
All good but where's the pics
Pic of my middle "older and rounder".
don't think anyone here would be interested, well I hope not.
if ya are, three dogs !!, to bad it's not happening.
As for the rest I think these items have truly been well covered.
I'll will however take some pics of tmic when it arrives and during diy fit up.
and some feed back I guess.
plenum upgrade, think plan is,
fit tmic, followed soon by airbox and turbo and we will see from there.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
-
25th July 2015, 05:58 PM
#37
pwaa, I don't think i've even seen cars out of the factory that clean, nice!
-
-
13th August 2015, 05:16 AM
#38
OK I've installed the kit, taken heap of pics just gotta get to writing it up.
but here's a tasteDSCF6227.JPGDSCF6237.JPGDSCF6360.JPG
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
The Following User Says Thank You to Robo For This Useful Post:
-
16th August 2015, 09:40 PM
#39
Took off for the weekend pulling 22 ft van.
over rd that I know how she goes, with same load etc.
the kit has improved temps big time.
wont go higher than 410 deg c.
I tried testing the temps on the freeway on purpose a few times to see if it would go higher,
even giving the business through the gears from a standing start up hill to reach 100 kph still 410 deg c.
pulling power up.
staying power also up !!
Easy mod, and very good value bang for your buck improvement.
maybe I don't know better, but a feller I know with same car, wta, plaz-ma plenum, and a (2860 I think) , also tuned, bragging "it won't go higher than 400".
but mine is yet to be tuned and still std ht18 at 12psi, so correct if I'm wrong but Its' looking good so far.
now the boss is on board with power up.
so turbo gtx2863r here we come,
"that'll fix him up".
yipeeeeeee.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
-
11th September 2015, 09:01 PM
#40
Intercooler fitted.
GTX2863R ordered.
Injectors ordered.
NPC 6x6 clutch on the way.
Injector pump DC3 upgrade, soon as other parts fitted at home
fit and tune look out,
outta my way.
humm looking at airbox, snorkle and engine mounts.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
-
The Following User Says Thank You to Robo For This Useful Post:
mudski (11th September 2015)