-
1st July 2012, 12:16 PM
#1
Expert
goodyear wrangler mtz with kevlar
Ok guys i have bought a set of these tyres and my question is about the pressure they should be at, i just checked mine after the 50km check of wheel nuts and checked the pressure and was surprised to find the pressure at 44.5 ( warm) psi, i was a bit surprised by this and i will ring the tyre shop on Monday about this but thought i would put it to you guys first,, so what ya reckon???
and if this is the correct pressure what would i drop to in sand etc??
cheers
-
-
1st July 2012 12:16 PM
# ADS
Circuit advertisement
-
1st July 2012, 02:52 PM
#2
Expert
Hey mate i got a set of wrangler duratracs on my ute and on road i run 40 psi , about 24 off road and bout18- 20 on sand, because then if you run into trouble in the sand you can drop psi more to say 12 to get you unstuck .
Cheers
Sent from my GT-I9100 using Tapatalk 2
-
The Following User Says Thank You to CorbinsGUte For This Useful Post:
-
1st July 2012, 03:15 PM
#3
-
-
1st July 2012, 04:40 PM
#4
Patrol God
44 is probably a little high. x2 on growlers for comfort and wear usually around the 36-38 psi mark.
-
-
15th July 2012, 07:57 AM
#5
I run 38 to 40 psi on road and 28 to 30 on corrugated dirt roads. This seems to work well for my 33" mtr.
-
The Following User Says Thank You to TimGU For This Useful Post:
Malgreen (16th July 2012)