-
12th July 2012, 09:18 PM
#21
Expert
Nice job mate. Looks very neat and for a fraction of the price of bought ones.
-
The Following User Says Thank You to frenzy For This Useful Post:
-
12th July 2012 09:18 PM
# ADS
Circuit advertisement
-
13th July 2012, 08:17 AM
#22
Advanced
Originally Posted by
MYR1G
Thanks mate,
Ahh such a simple way,was trying too work out for ages hahah!!!,was going to buy some sliders but the bearing option seems cheap,stronger and best of all SIMPLE!!!One last question,what thickness timber did u go with?
Thanks,Jake
I used 12mm structural ply - only because i had 2 sheets sitting here at home
2000 GU Patrol TD4.2T with heaps of stuff
2007 Bayside Campers Offroad CT with more stuff
-
-
13th July 2012, 10:47 PM
#23
Expert
Awsome job waz so are you now taking orders for people round your area as you could get at least cost plus coupla hundred on top
Just an idea to give you some more moola$$$$ to upgrade other bits on ya rig.
good article to mate
Got the baby GQ a 1997 2.8TD RX Wagon Racetech EGT & Boost Guages Dobinsons coils 32in BFG KM2 M/T
-
The Following User Says Thank You to HammerBuilder For This Useful Post:
-
14th July 2012, 01:03 PM
#24
Advanced
Originally Posted by
HammerBuilder
Awsome job waz so are you now taking orders for people round your area as you could get at least cost plus coupla hundred on top
Just an idea to give you some more moola$$$$ to upgrade other bits on ya rig.
good article to mate
Hahaha , the $$$$$$$$$$ would handy but them i'd have to delay my own mods
2000 GU Patrol TD4.2T with heaps of stuff
2007 Bayside Campers Offroad CT with more stuff
-
-
21st July 2012, 03:39 PM
#25
Originally Posted by
waz65
Thanks Stropp , they are about 1100mmW , 950mmL and 280mm high
think of making some to fit flat with the seat when folded down just see if your do
-
-
29th July 2012, 01:02 PM
#26
-
-
5th August 2012, 08:46 AM
#27
Hi Waz, nice units, could I ask you where you got your draw slides from
-
-
9th August 2012, 01:44 PM
#28
Advanced
Originally Posted by
blackhooded
think of making some to fit flat with the seat when folded down just see if your do
mine don't sit flat when the seats are folded down i should of made them lower so they would be very handy a bit of a mistake on my part
Originally Posted by
big bell
nice job well done
Thanks mate
Originally Posted by
bushy50
Hi Waz, nice units, could I ask you where you got your draw slides from
Thanks , the slides are naachi bearings and box tube
2000 GU Patrol TD4.2T with heaps of stuff
2007 Bayside Campers Offroad CT with more stuff
-