My Rear Drawers

[waz65]

I got a bit bored during my days off so after researching all the DIY drawer threads and looking at the price of new sets i decided to knock up my own seeing as how i had most of the bits and peices here , The dimensions are loosely based on the ironman drawers size so here some pics :
The frame in the back checking measurements


Here's the drawers made up :


Almost finished :



I've only got to make up the side wings then all finished
cheers
waz

[Winnie]

Very tidy, nice job mate

Tappa tappa

[Sir Roofy]

well done mate got to be cheaper than ironman or the other brands

[growler2058]

Brilliant job mate well done!!


---
I am here: http://tapatalk.com/map.php?pxexoq
Tap, Tap, Tap, Tap, what's that freakin noise?!

[Brendan56]

What did that set you back?

Tappin trolls
Brendan

[wildgu6]

Top job there buddy, very neat lookin set up.
What size bearings and tube did you use ????

[Maxhead]

Looks good mate, definitely cheaper then the off the shelf systems

[waz65]

Thanks guys , Brendan all up they cost me about $200 as I had most of the bits already ,
Wild98 , the bearings I used are Nachi 6200-2NSE 30mmX9mmX10mm(inside diameter) and 25x25 box tube
Cheers
Waz

[wildgu6]

Thanks guys , Brendan all up they cost me about $200 as I had most of the bits already ,
Wild98 , the bearings I used are Nachi 6200-2NSE 30mmX9mmX10mm(inside diameter) and 25x25 box tube
Cheers
Waz

Thanx buddy, as said looks tops and at that price DIY rox, Well done

Cheers Pete

[waz65]

I had a chance to finish off the side wings and ends today :