-
10th October 2010, 09:29 PM
#1
New seats
How much would a drivers seat cost me?
Anyone have any ideas??
-
-
10th October 2010 09:29 PM
# ADS
Circuit advertisement
-
10th October 2010, 09:35 PM
#2
Nasty Dog - Moderator
Hey Alan, just a tip mate, go here http://www.nissanpatrol.com.au/forum...-Introductions and put a Introduction up.........you may find that you will get some replies to your questions then.
If any members require assistance in anything regarding this forum, just let me know via a PM and I will help you in any way that I can.
-
-
10th October 2010, 09:36 PM
#3
Rotaredom
as AB has already posted in one of you other threads.....stop in at the introductions section and tell us a bit about yourself as a lot people won't reply without you introducing yourself to the community mate.
-
-
10th October 2010, 11:01 PM
#4
Price depends on what model and spec you have, the more common the seat the cheaper it will be. Do you want a standard replacement, aftermarket, new or used?
Tony
-
-
11th October 2010, 07:25 AM
#5
SUCH IS LIFE
Have a look at the PARTS section on this website and that will give you an idea of the price mate
http://www.nissanpatrol.com.au/parts.html
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
12th October 2010, 12:00 AM
#6
Patrol God
Now if you went to Introductions and let us know about you and your rig. We would know where you are, and could direct you where you can purchase such type. And as Tony has said how much you could pay depending on model and seat type.
Getting Older Is Unavoidable, Growing Up Is Optional!
-
-
12th October 2010, 12:21 AM
#7
Expert
Depending on model, you can adapt various seats to fit.
1984 MK Anniversary Model, LWB,SD33,Air-Con,P/S,Straight Body,Minimal Rust.........Not Bad For Free
-
-
16th June 2011, 04:43 PM
#8
apology for making this thread up just need some help on my nissan. I would like to replace the bench seat in my truck.its a very basic truck. can i use 240sx seats or altima seats? anyone willing to help? thanks a lot!
___________________________
If everything comes your way, you are in the wrong lane
need some help for the replacement truck seats
-
-
16th June 2011, 07:53 PM
#9
Almost any seat can be made to fit with enough engineering, how easy it is depends on the individual seat.
Changing from 3 seats (in the front) to 2 requires engineering approval and blue plating to be legal, any seat that is not a straight bolt in also requires engineering approval.
Tony
-