Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
I still have and use that hook on the back of my Patrol, its earned its keep.
As some know trying to get my roof rack fitted this Saturday, after its on Ill fit my wheel hoist
and do a video I can put here to show you how easy it is to get a wheel from the roof rack to the
ground using only your thumb.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
The easiest solution is to replace the OE hook with my
12mm thick flat plate again very strong.
You can also if you want bolt a 10,00lb black hook to
it as well.
To fit two you'll need to drop the bullbar and make a plate with three 14mmx 1,5 nuts welded to it.
IMHO not the best snatching from only one side, a bridle from two points would even out the weight better.
Last edited by threedogs; 11th June 2015 at 12:20 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
I still have and use that hook on the back of my Patrol, its earned its keep.
As some know trying to get my roof rack fitted this Saturday, after its on Ill fit my wheel hoist
and do a video I can put here to show you how easy it is to get a wheel from the roof rack to the
ground using only your thumb.
Been slack as mate and too sore.
But you've given me a reminder to get off my butt.
Need some heavier "U" bolts and thats about it.
I'll go to the bolt place tomorrow and see what they have.
thanks.
Might see if Simon from 4WD tv can do a video on it for me.
Last edited by threedogs; 14th July 2015 at 05:00 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Hi Rusty I'm pretty sure the "T" shaped one will suit you set up,
double check tonight, the folded style fit under the chassis rails
sms sent lol,
Computer on last legs and why bloody not
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Can you PM me some info as to what I need for my GQ, Millweld bullbar if that makes a difference with pricing.
I've been thinking about it for a little while, front recovery points, one each side.
Not sure how the Milweld mount, can you see
the three holes either side of the inside chassis.
Do you have a close up pic in your build thread I can look at?
04 ST 3lt auto, not enough Mods to keep me happy, but getting there