A Guide on installing your own remote central locking in under 20 minutes
Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
OK Wired as above. How do we now get the remotes to work. There's three buttons on the remote. How do we get it the remotes and the main unit talking to each other? I've got power in the remotes (coloured LED's flash). Thanks again in advance.
Mark
They should work out of the box. Mine did. But there is a learn button on teh module I think. If nothing happens when you press the button, maybe you have it wired incorrectly. Maybe.
Sorry. I've been a way a bit, and just getting back to this. Looks like I've got to look at the wiring again. I found what should be the learning button on the module. The wiring may be different, even though the wiring colours appeared to be right. Mine's a 2005 4.8 petrol on gas.
Mark
Bit of a thread dig here but when replacing the module did you remove the old unit completely or still need some of the wires connected to that particular unit? Hopefully attempting it this weekend
About to start this but wanting to test that these wires are getting the signals needed. Would a test light on the lock and unlock signal wires as I lock/unlock the car with key show positive power through it?