lift for tyres

[BIG PIG]

hey guys since im very new to this what sort of lift will i need for either 33's or 35's

[my third 256]

what model 2" for 33's watch the front guard mudflaps on gu 3"for 35's or just go 4" then all tyres will be ok
just remember the higher the lift it gets harder to get in
stephen

[GQPorkroll]

On my GQ LWB I'm running 35's with a 2 1/2" lift (2" coils and 1" spacers) I have removed my mud flaps and I had to trim my rear flares a bit. If you used rubber flares you would be fine. If you go from alloy to steel wheels, like I did, you'll need a 1/2 spacer as the thread on the studs doesn't go all the way and the steel wheels aren't thick enough. I haven't scrubbed once, no issues on the front but if the rear was fully compressed it would foul.

I used a constant load coil in the rear as I have a 100L gas tank and a steel rear bar and will have a set of drawers etc so don't want the rear to sag. I also used foam cell shocks and i'm happy with the ride quality.

[BIG PIG]

Awesome thank you guys looks like i might just go a 3" lift and some 35's and is the price the same for constant load coils