-
10th October 2014, 03:31 PM
#261
Administrator
Originally Posted by
TPC
Andy, if you are not going to proceed with the REDBACK ROOFTOP BAGS can I keep the prototype?
Of course you can fancy pants....
-
-
10th October 2014 03:31 PM
# ADS
Circuit advertisement
-
10th October 2014, 03:38 PM
#262
Patrol Freak
What's this about some roof top bags, they would really be handy when out and about. How can I get my hands on one of them.
Live life, Love life.
Snatch straps on towballs can harm and/or kill!!!!!!
-
The Following 2 Users Say Thank You to krbrooking For This Useful Post:
Clunk (10th October 2014), oncedisturbed (10th October 2014)
-
10th October 2014, 08:25 PM
#263
Originally Posted by
krbrooking
What's this about some roof top bags, they would really be handy when out and about. How can I get my hands on one of them.
You have 3 options, Be extremely patient, Buy a needle and thread or shop around.
I've been trying the first option, option 2 ... I don't have a manjina so I may have to start shopping around lol
-
-
10th October 2014, 08:34 PM
#264
Administrator
The honest situation to this is I have to fly over and show someone in person exactly how I want it.
I need to be there for at least 3 days. It goes like this...
I show them, they make it, it's wrong, I show mistakes.
They make again, it's almost correct but they used different zips and threads from my original explanation because they couldn't be bothered walking down stairs to replenish their stock.
They make again, it's correct but upside down.
I have a qc person on the floor that we pay ourselves as our employee. I need to properly make the product myself in front of him and the workers and put our employee in charge of qc based on final correct sample.
-
The Following User Says Thank You to AB For This Useful Post:
mudski (10th October 2014)
-
10th October 2014, 08:48 PM
#265
Dribble Master
Originally Posted by
AB
The honest situation to this is I have to fly over and show someone in person exactly how I want it.
I need to be there for at least 3 days. It goes like this...
I show them, they make it, it's wrong, I show mistakes.
They make again, it's almost correct but they used different zips and threads from my original explanation because they couldn't be bothered walking down stairs to replenish their stock.
They make again, it's correct but upside down.
I have a qc person on the floor that we pay ourselves as our employee. I need to properly make the product myself in front of him and the workers and put our employee in charge of qc based on final correct sample.
And your point is........................
Don't worry about it, we've waited this long, I'm sure another couple of years or so won't make any difference...... Besides we enjoy giving you a hard time
Bwahahahaha
-
-
10th October 2014, 11:40 PM
#266
Originally Posted by
everz
Was just checking out the site I'm looking for a good bag, What's the go with the "tough bag" coming soon?
How soon are we talking mate?
Thanks
Hey!? Theres a tougher version in the pipeline?
-
-
10th October 2014, 11:49 PM
#267
Originally Posted by
AB
The honest situation to this is I have to fly over and show someone in person exactly how I want it.
I need to be there for at least 3 days. It goes like this...
I show them, they make it, it's wrong, I show mistakes.
They make again, it's almost correct but they used different zips and threads from my original explanation because they couldn't be bothered walking down stairs to replenish their stock.
They make again, it's correct but upside down.
I have a qc person on the floor that we pay ourselves as our employee. I need to properly make the product myself in front of him and the workers and put our employee in charge of qc based on final correct sample.
Yep. I know how it goes. It baffles me how, they are not very bright they are sometimes.
I have just gone through the same with these promised LED GQ rear light assemblies. But it was all via email, photos and samples. I am at a loss on any other way to do it other than flying over their myself and showing them. I have already spent too much money on it...Sometimes it feels like I am trying to teach my daughter how to eat again. I have to spoon feed these people.
-
-
11th October 2014, 07:43 AM
#268
Rotaredom
Originally Posted by
AB
It goes like this...
I show them, they make it, it's wrong, I show mistakes.
They make again, it's almost correct but they used different zips and threads from my original explanation because they couldn't be bothered walking down stairs to replenish their stock.
They make again, it's correct but upside down.
That's what happens when you outsource Aussie work overseas, pay peanuts you get monkeys
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to NissanGQ4.2 For This Useful Post:
BigRAWesty (11th October 2014)
-
11th October 2014, 08:10 AM
#269
Administrator
Originally Posted by
NissanGQ4.2
That's what happens when you outsource Aussie work overseas, pay peanuts you get monkeys
First off our employee is paid 50k a year and is highly skilled so hardly a monkey and hardly paid peanuts.
Secondly, our business sources parts from all over the world and we have tried our best to keep it in Australia but quite simply the quality of labour and product is actually non existent in Australia.
Thirdly, we have spent the last 12 months trying to bring portions of work back home (using same quality and labour) and after pricing it up, our cost price is higher then that of retail price in Australia.
I'm all for waving the old Aussie flag mate but unless the industry changes as a whole if we bring the business home we will have no business, no money, no home sooo.....
-
The Following 2 Users Say Thank You to AB For This Useful Post:
MudRunnerTD (11th October 2014), NissanGQ4.2 (11th October 2014)
-
11th October 2014, 08:12 AM
#270
SPAMINATOR
Originally Posted by
AB
First off our employee is paid 50k a year and is highly skilled so hardly a monkey and hardly paid peanuts.
Secondly, our business sources parts from all over the world and we have tried our best to keep it in Australia but quite simply the quality of labour and product is actually non existent in Australia.
Thirdly, we have spent the last 12 months trying to bring portions of work back home (using same quality and labour) and after pricing it up, our cost price is higher then that of retail price in Australia.
I'm all for waving the old Aussie flag mate but unless the industry changes as a whole if we bring the business home we will have no business, no money, no home sooo.....
Sooooo how are the roof top bags coming on
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
-
The Following 3 Users Say Thank You to growler2058 For This Useful Post:
AB (11th October 2014), Clunk (11th October 2014), megatexture (11th October 2014)