2" body lift

[healy]

whats the best 2'' body lift poly, aluminium?? as im going a gu 2" lift on my gq as well i've got a manual is there anything else i would have to look at doing as well

[MudRunnerTD]

at least 70mm diameter Poly blocks mate and it will be fine.

Extend your diff breathers, check your gear box breather on the way up to.
Relieve the clutch vac line connected to the chassis rail on the left side near the fire wall.
Relieve the steering column rubber uni by slipping it down the column to flatten it out.
Slot the back of the Low range stick floor opening to allow for selection of Low range.
Watch out for the lower cowl on the radiator as it may need adjusting for the fan to operate. I have never had to do this and have done 5 or 6 BLs already but i have heard of plenty that have.

[healy]

thanks mate

[healy]

i've already got diff breather kit but i cant find where it goes does anybody have photos up so i can see or can someone send pics

[luvpsi]

what kit fo you have piranha?

[healy]

ok so i've orderd my 2" body lift and getting a bar that suits the lift. What do i need to do to make things fit?? as i understand brake lines dont come into affect by a 2" BL gotta drop the rad and alter the hi/lo shifter (can i just gut the floor abit)?? is that all?? and whats the best way of fitting the blocks in??

[MudRunnerTD]

Read my post again

at least 70mm diameter Poly blocks mate and it will be fine.

Extend your diff breathers, check your gear box breather on the way up to.
Relieve the clutch vac line connected to the chassis rail on the left side near the fire wall.
Relieve the steering column rubber uni by slipping it down the column to flatten it out.
Slot the back of the Low range stick floor opening to allow for selection of Low range.
Watch out for the lower cowl on the radiator as it may need adjusting for the fan to operate. I have never had to do this and have done 5 or 6 BLs already but i have heard of plenty that have.

[nissannewby]

I havent moved the radiator in mine and have no issues with the cooling side of and the fan doesnt foul. One thing i did do was shorten the lower radiator hose as it looked like it nearly had a kink in it.

[healy]

cheers for the info mate

[aussiemale]

I take it that the same issues to keep an eye on with the GQ with a lift would be the same across the board?