-
24th April 2012, 05:06 PM
#1
Roofracks - GQ to GU
G'day,
I'm looking at pensioning off my GQ LWB and getting a GU LWB. I have a full length TJM Alloy rack on the GQ, will this fit a GU?
-
-
24th April 2012 05:06 PM
# ADS
Circuit advertisement
-
24th April 2012, 09:06 PM
#2
Expert
Yep, as long as there's some width adjustment available.
-
-
25th April 2012, 09:31 AM
#3
Thanks, Guess I'll have to do some measurements. Not really any width adjustment possible without cutting and re-welding the rauck supports....
-
-
25th April 2012, 10:47 AM
#4
-
-
25th April 2012, 08:44 PM
#5
Expert
I bought a roof cage for my GU that supposedly came off a GQ, it did need some adjustment so I'm thinking if you can't adjust it won't fit...
GUIII ZD30 Manual Wagon, OME 2" lift, 33" BFG AT's, Snorkel, Chip, 3" Redback Exh, Dual Batts, etc.
KEEP OUR TRACKS LITTER FREE!
-
-
31st May 2012, 08:21 PM
#6
Expert
I have a GQ 3/4 rack on my GU IV. I needed to bend the full length rails out from the rack about 10mm on each side. It sits a little higher than a GU but does the job. Mines alloy TJM one. I made the 6 clamps cause TJM wanted $30 each.
06 GU IV Nissan Patrol wagon 3.0L, Tough Dog 2" lift, Xrox bar, 12k Mako winch, 33" muddies, 3" exhaust, Awning, UHF, drawers & fridge, custom sliders, DVDs, custom water tank and pump, rack etc etc.
Now just in - GQ Shorty 4.2 petrol, UHF - but looking at turbo or V8 conversion
-
-
1st June 2012, 09:02 AM
#7
-