-
18th April 2012, 12:03 PM
#1
Body lift blocks Confusion opinions wanted
I am looking at a 2 inch body lift but their are so many different types not sure wich way to go.
Any opinions suggestions on wich ones are better.
-
-
18th April 2012 12:03 PM
# ADS
Circuit advertisement
-
18th April 2012, 12:11 PM
#2
Patrol God
much of a muchness really as long as the come with crushtubes for the blocks and atleast grade 8 bolts.
-
-
18th April 2012, 02:15 PM
#3
Superior Engineering has alloy body blocks for $16 each which is cheaper than most poly blocks.... far better choice IMO.
-
-
18th April 2012, 04:00 PM
#4
Patrol God
I've heard alloy blocks transfer more noise into the cab compared to nylon/ poly ones?
tappin it
Hello from Under Down Under!
-
-
18th April 2012, 07:56 PM
#5
It depends if you are going to get it engineered, if so I would ask an engineer as it is best to go with what they want
-
-
18th April 2012, 09:02 PM
#6
there was a thread on patrol4x4 that i won’t post a link to (malware risk) about body lifts and guys using boat trailer rollers that were made from the same material as the Polly blocks and same diameter a few had done it don’t know if i would personally but it seemed like they had done a fair bit of research on them. Just thought I’d mention it.
-