Have you done the calcs for this? Do you know the specs at all of the PTO capacity? You will need 16hp to run that pump @ 1000rpm @1500psi. And about 110nm of torque when at the 1000rpm and 1500psi....
Type: Posts; User: nissannewby
Have you done the calcs for this? Do you know the specs at all of the PTO capacity? You will need 16hp to run that pump @ 1000rpm @1500psi. And about 110nm of torque when at the 1000rpm and 1500psi....
Finally bought the last piece of the puzzle to lift our Dmax. Got the rear suspension sorted. Hopefully what I have worked out will work out and give a nice comfy ride in most situations.
Have a look at my earlier comment to. Post #5138.
His winch is not what it's advertised as.
Most 9-10mm synthetic winch rope has a breaking strain higher than 17500lb... pretty easy to find all this stuff....
You will have no dramas mate. Have an actual look at the specs for that 17500lb winch over the real world runva 13xp.
The 17.5k lb winch has a 6.6hp motor with a 218.4:1 gearbox.
The runva has...
We have a proper unit at work which has much longer threads. The unit also automatically unwinds out the nutsert. So you can put them in as quick as it takes you to screw the new nutsert on.
Wait until you use a pneumatic rivnut tool. So good.
Depending on your roof style clamps might be the only option. Some models do have the rails bolt onto them that run front to back but if they arent there fron factory then it won't leave any other...
The bahco combo ratchet spanners are great for the weight saving. (If you don't already have them). Each spanner has 4 different sizes in. And I believe they come in a set of 5. So you only need to...
Interesting. I have a ctek thats about 8 years old and is still going strong. It use to charge the largest battery that CAT make fairly often as I used it for the fridge when camping so it hasn't had...
I would imagine it to be quite a lot better. I have run 35s for years with standard hubs and never had an issue. The old GQ use to cop a hiding as it was basically setup as a play rig and its hubs...
Pretty good for genuine.
How much? Pm if you like.
4 Yokohama GO15 All Terrains for the 62 :)
Its while being driven etc. You simply dont have the load to make the turbo work to its ability static. Most people drive their patrols ;p
Its all good purely a suggestion. I also have experience in the field of filtration although from a differing perspective. Heavy non-highway equipment use the cyclonic method with the use of many...
660 Cfm isnt enough for a 6.5 turbo chev. They also by design can remove the heavier dust particles just as they do with water removal. A ram head coupled with a high volume airbox will see...
Just use the ram head....
It did cross my mind. I think I will need quite a few months to get back on top of things. Its a lot of money to spend.
Well I have officially bought a Y62 Ti-L. Now just gotta wait for it to turn up :D
Universal pipe kits are cheap these days even universal silicon kits. You could get all new pipe and silicon for under 250.
Interesting. Good discount at 50%. What annoys me is I can still get a genuine cheaper out of dubai inc shipping. We get ripped over here.
Even so the only time you should pay more than $100 for 20L at retail is when you are looking at 100% synthetic oils.
Unlikely. That's still dearer than trade. There sales are good for what you should actually be paying all the time there normal prices are just stupid high.
Is it to late for you to swap to a 4601hp?
Wiring to ignition is fine. Makes services easy for priming the fuel filter prior to starting.