Search:

So Sunday saw the early chrissy pressy fitted. Pains me but it's kings. Can't turn down a pressy from the folks. And it's only an awning. Not going to be detrimental to a trip if it fails..
Solid...

V1 and 2 are simply a variable switch set by the dial. Brake force is one setting and that's it.
The v3 has a gyro in it to sence the force of the braking affect.
So the harder you pull up the more...

To the Nav.... did I miss something??

Sent from my SM-G977B using Tapatalk

Hey crew long time now post. How life changes can swallow time up....
The pathy is still going strong.
Not much to report but finally fitting the brake controller. And God daym these ti's are...

Ok so your well past what stock ECU can handle.
Imo throw that chip in the bin before you do damage. All they do is ramp pressure up.

Back to basics but how long since you've cleaned the maf...

Ok so if you know there are no leaks we have to set it correctly.
First up.
Stop fiddling..
Number one cause of frustration.

To set.
Close needle right off.
Then on an open stretch get into...

You have to keep in mind these are mechanical devices.
So you need an action for a reaction and it takes time.
Are you running the factory intercooler?
You may have leaks in the system ( they...

Just had a quick look and yes your right but seems to be rod driven like similar to the patrol, but up high.
The pathy is cable driven from both directions.

Sent from my SM-G975F using Tapatalk

???
Lost me?
Single handed just the outside handle is up on the door frame not in the door body like normal.
You can see the handle inline with the rear window.
The inside handle is in the normal...

The pathy has the handle on the c pillar not in door like the nav so sorta one of a kind thing.

Sent from my SM-G975F using Tapatalk

Yep its good on dirt roads. Pot holes are no issues..

Sent from my SM-G975F using Tapatalk

Only a few weeks.
Being Ti it's bloody nice. So many creature comforts..
Ride is good for its age.
Better than the patrol.
Apart from the rich issue above mate.. it's good.
I do have a small...

Speed is not needed if you you have load and friction.
And you and I both know that test in the video was soft.
Slight uphill unstuck car on hard ground..

Sent from my SM-G975F using Tapatalk

So a small update.
Not jumping into full build yet as were chasing a fuel issue.
Seem it's picking up it's rich at the cats and not dropping into a lean burn cycle.
So could be a few things....

I'm not a fan at all. High load, rotationg alloy steel on thin synthetic strands.
It will melt it.
And grit will make it worse.
The anodising will wear into it.

Blocks using bearings are a far...

This system is a must for off road setups as a standard twin drive line a truck you'll be snapping uni joints in no time.
If you can add a second pivot in the way of the rocker so both rears can...

Mate it's a carnt for sure.
But honestly mate i was in the same boat with my zd at 110 thou.
They pulled the head off and were convinced it was cracked as the gasket looked fine.
Crack and...

It's bloody nice being able to overtake again......

Sent from my SM-G975F using Tapatalk

Cheers guys. We will be jaffa 2020 that's for sure.
And can't wait.
And same with anyone here if your over Yorkes way we have 3 acres now your more than welcome to set up on.

Sent from my...

Unfortunately not. 13.5 on premium 98 and 15lph on 91.
But it's on 275/65/17's which is over an inch bigger than stock in diameter and width..Still a wagon mate. The pathfinder is the 7 seat version...

Was also thinking dinner.....
Sorry mate. If it's that bad to amputate the leg it's probably going to be far more painful and risky than it is now.
Sometimes mate things are better off not in pain...

I'll lay a ripper skid out the front driveway on my way threw to show it off ey lol..
I'm serious though mate. Fark it boogies

Sent from my SM-G975F using Tapatalk

Well I'm half way through this trip and what a joy it's been so far.
So most know the trusty gu got passed on to a young fella who's taking it back to Darwin..
Lucky fkn car I reckon..

So we've...

Awesome mate thanks a tone for that.

Sent from my SM-G975F using Tapatalk

Looks like it was a ripper night and im not happy I couldn't make it.
Gone but never forgotten.
RIP Roofy.

Sent from my SM-G975F using Tapatalk