Search:

I finished up my second glovebox a few days ago. Took 2 days to build but that included glue drying time. Also installed and wired up a set of working tail lights with indicators. I had brake and...

Is this what an RTC looks like?
56460

Today I modified my new steel bar to accept the park/blinker lights from my original stock aluminium bar and mounted the hawse fairlead. Dramatically changed the look.
Turned it from a cow cockies...

I did the same to mine. No plugs but enough wire to pull out and unscrew globes.

Installed the full length roof rack last night. Its certainly cheap crap. Very rough in its attachment but turned out pretty sweet once I had it worked out.
Awning never turned up so let's hope it...

After weeks of putting it off, I decided to hook my rear LED work light to the reverse light via a diode so it doesn't back feed to the reverse light when manually switched on via the switch on the...

I fitted an Outback Roof console, ABR dual battery tray and wired up a Century Deep Cycle with a Redarc SBI12 solenoid.
I have a fuse box under the passenger dash for future accessories that's now...

I bought a Tigerz11 12000lb grande for $599 and it hasn't let me down. Its identical to the supercheap ridge rider 12000lb winch that's priced at around $900

Its Marson brand and cost $145 which includes a selection of M4, M5 and M6 steel nut. I was looking at a cheaper brand for $99 and it was only rated for M6 aluminum nuts and didn't come with any so...

I'll have a look when I get home. Had a look at a few cheaper kits but decided to go for a better quality one that will handle 6mm steel nutserts

I bought a nutsert kit today to make under bonnet modifications so much easier and decided its first use would be to assist after I ripped out all the dodgy spotlight wiring that the previous owner...