I've had a Browns in for four years now and if you just want to replace not upgrade they are real good value for money IMHO.
Type: Posts; User: 4bye4
I've had a Browns in for four years now and if you just want to replace not upgrade they are real good value for money IMHO.
New radiator , viscous fan , thermostat and water pump through the week ready to go away down south to Ravensthorpe, Hopetoun and Bremer Bay for a couple of weeks. Loaded the trailer today....
Gold that
Sent from my iPhone using Tapatalk
Removed the plastic bumper cover and filled the dents. Sanded and primed it. Got up this morning and put 3 coats of base colour on, then buggered up the fourth and had to wait for it to dry, then...
Prepped and painted the rear bumper where I had scraped the paint before installing the rear view camera. Then touched the wet paint, tried to fix it, made it worse. So what did I do to my Patrol...
Washed it and cleaned it. Found all the lost tools in the back. Granddaughter helped do the bits I can't reach.
72278
Betcha wish you drove it home from the panel beaters.
Found that the hole where the pyro for the EGT gauge had worn and the sensor was loose. Replaced the dump pipe with a brand new one. Max boost now 5psi at a temp of 550deg. Readjusted the NADS and...
Washed it.
69807
How did you go with the suspected thrust bearing issue?
Got it ready to go away at Easter - pumped tyres, checked the fluids, cleaned the MAF and all that stuff. Also checked the trailer . All good.
Nothing high profile or big names mate, just got West Coast Suspensions to do it. All good and guarantee for three years. Got rid of the clunk from the rear end too. I may have to re word that. Nah...
Open to interpretation.
Gave it 2" on each corner.
Just bolted on my rear recovery point from Outback. Thanks John - now I can be recovered backwards as well as forward.:clapping:
Thanks clunky but the lights are ok its the bloody plastic bum per that I have got to repair. Moral to the story, if the distance between the ground and the exhaust is less than the hole your driving...
Fixed it up. I will put up a DIY panel beating thread later - much later.
59095
Did you get the roof rack on yet?
Yes used one to feed my UHF and also another one to feed TomTom. Had them in for over 6mths and they seem to work fine.
Got mine from Jaycar.
"Rack is flat, Patrol gutter is curved, all legs are the same length. Currently the clamps which are rubbish will need to crank down ie: bend the rack 30mm."
Careful you don't stretch the gutter...
Drained the radiator and engine and replaced all the coolant. Cleaned the MAF which actually made a difference.
Changed the intercooler last week so now all the oil is inside the motor, not in the...
Iv'e got a bench like that - my missus uses it for Bar B Cue stuff!
Looking forward to pics of the finished unit.
Try this http://www.brownsradiators.com.au/shop/?category=Intercoolers&number=3&subcategory=Nissan_CAC
No its exact fit just welded not crimped like the Nissan ones.
Changed the intercooler over on my 3LTR. Fitted a fully welded local made one. $385 for the unit, used an 8, 10 and 12 mil socket and took just under an hour, including washing the guard off after....
:(:(:(:(:(