If it's not the glow plugs/ battery it may be your pressure control valve on the common rail
Type: Posts; User: Dougy
If it's not the glow plugs/ battery it may be your pressure control valve on the common rail
Took my 2011 gu into get the air con fixed and they said it has a leak in the suction line that goes from the main evaporator to the dual zone evaporator. They said a replacement line was going to...
Rang them and yep they sent wrong one, the new one should fit with original saddles. Just have to wait till it gets here!
They are adjustable links, supposed to fit a 2" to 8" lift. Mines 2". I was gonna use them on the shortest setting hence having a 2 inch lift. I'm gonna ring them today anyway as the swaybar is the...
Hey guys, I recently received a Superpro 24mm heavy duty rear swaybar for my 2011 gu wagon. Also I got the left and right extended links from patrolapart. Only prob is the original d bush saddles are...
Thanks will give the test a go this morning.
Battery seems ok, turns over fast enough, glow plugs are new, the primer pump took 3 or 4 pumps to get firm , could hear air bubbles in fuel tank when I was doing it. after I primed it, it started...
Hey everyone, my 2011 gu zd30 cr takes quite a few revolutions to start especially when its cold. It always has taken a few turns to start but its getting worse and yesterday after not being started...
Hey everyone,
I have a 2011 3lt common rail gu wagon, it has developed a leak on the power steering gear assembly. It seems to be leaking out of the bolt at the top of the box which I believe is...
So in the end I got the annoying key beeping sorted, but now the wife tells me the car locks itself when she is driving. I guess its not registering that the key is in the ignition, it will lock...
$255 for the new IMMU, pretty good price I thought, considering I was expecting it to cost a lot more to get the car on the road again!
Back on the road!! Got the new IMU, bolted it on and plugged it in and it started straight away. Thanks everyone for all the help!
I'm a bit keen on the Cooper ST Maxx 285/75/16 but not so keen on the $392 each here in Clare!!
Nizzbits says the new unit shouldn't need programing, so hopefully 10 min after I get the part I will be back on the road!!
Yeah Gary thinks it doesn't need programming, but hes gonna check it out for me
Right so I soldered it back together, end up having two breaks in it, bit fidly to do and had to scrape the insulation off wire first. Put it back on and still wouldn't start. The wires weren't quite...
Yeah ok thanks Yendor, was thinking I may be able to solder it to get it to the dealer without a tow. Will send Nizzbits a pm.
I did try my other key but didn't work.
Thanks Yendor, the NATS is damaged as the fine wire is broken on one side, tried to twitch it together but bit fidly and didn't seem to work anyway. Glow plug light comes on as normal not sure on...
I ended up going with ome with constant 400kg springs, was bit worried might be a bit stiff to ride in but its not too bad, I also had the option of constant 200kg springs. Handles great but...
No but will disconnect it now, thanks.
Need Help, Car wont start. When I pulled the bottom shroud off (to disconnect the ignition warning beeper) I noticed the plastic ring around the end of the ignition barrel was slightly broken. it has...
Need Help, Car wont start. When I pulled the bottom shroud off I noticed the plastic ring around the end of the barrel was slightly broken. it has copper wire coiled around it and the wires were...
Thanks everyone, theres an A on the taller springs and a B on the shorter ones, no other instructions. Reckon i'll put the A ones on the drivers side.
Im about to put my OME 2" lift springs and shocks in, and I noticed the springs are a little different in height, obviously the rear springs are taller than the front springs, but shouldn't both rear...