Sorry I should have specified what model. It's actually a gu dx ute. had a look at the wiring diagrams and compared it mine. However I can't find the power feed in on the back of the master switch on...
Type: Posts; User: Glen 93 patrol
Sorry I should have specified what model. It's actually a gu dx ute. had a look at the wiring diagrams and compared it mine. However I can't find the power feed in on the back of the master switch on...
G'day all.
I've got a curly one for you. I'm putting in power windows from a wagon into my dx ute. Was just wondering if anyone could tell me which of the wires on the back of the master switch...
G'day all.
Fuel pump packed it in last Friday night whilst out on a track. Managed to dodgy fit a hand pump from an outboard to a jerry can to get me out and back home (nearly 60km away). checked...
The normal lights come on in the dash when ignition is on. Ecu does power up.
Dual battery. Both 12.7 volts. I've check all fuses and relays. All are working and seem fine. I've swapped some over with others aswell. No engine lights of error codes or anything light up. To me...
G'day all.
I've got a sticky one for you on behalf of my brother.
His rig is a 2000 gu 3L diesel with a 2005 model zd30 engine.
He was driving home one night and his truck just stopped as...
Hi all.
I've got a small problem at the moment. I went to replace my dust cover on the clutch fork and the cutch fork for some reason has dis lodged and is not in place. Any ideas or hints as to...
No stress mate.
By looking at the pics that kallen posted, it just shows that there is bugger all support behind the wings on the end where the weight will be. I'm thinking now of maybe...
That'd be awesome. I've seen it done a few times on the cruisers but nothing really on a patrol
Hi all
Has anyone fabricated up a swing away carrier to fit onto a stock rear bar. I'm thinking about doing this soon to fit my tyre on one side and a jerry can holder on the other side.
Now do...
Hi guys.
As title suggests.
Wtb a rubber clutch fork boot to suit a gq. Any one got a spare one?
Cheers Glen.
I was really worried about getting the gearbox out as they are huge. And I also have rego due in 2 weeks so I wasn't looking forward to replacing the clutch with little time to spare, just incase...
Ok problem solved. I read up about this problem a bit more. They say to, with water, flush out inside the bell housing from beside the clutch fork whilst in neutral and the engine at idle speed. This...
Cheers guys. I can't do a lot at the moment as the truck is nearly 300km away from me this week while I'm at Tafe. When I get home at the end of the week I'll check it all out
Hi all. Here's one for you. My mate and I went out yesterday to find some mud and the strangest thing has since happened. My mate noticed his clutch 'slipping' and free revving whilst in gear. We got...
G'day all.
Just browsing the market for a long ranger tank for my gq wagon.
I can get my hands on a few second hand, 146l rear main tank replacement ones, but I was just wondering what would be a...
Ok so I checked out the engine this arvo. Was a 2005 model. Also got Certs from the nissan place to confirm the engine swap. Thanks for the input on this one guys.
P.S; ill have to get my brother...
Thanks guys for the handy info. I'll make sure we check it out before handing over the dough.
Cheers Glen.
hi guys,
My brother is purchasing a 2000 model zd30 gu patrol tomorrow. The owner says it had a new engine done back in 2005, and a 2005 model zd30 was put in place as the old one shat its guts. Can...
Ok I've installed some runners from Dunn & Watson. 125kg buggers.
Man they are good. Anyone wanting runners, I would recommend you look at these.
Cheers Glen.
Under water hey, now they sound like a good set of runners!
Has anyone used Dunn & watson runners before?
I done a bit of research and they seem to be alright.
g'day guys,
ive just re-made my rear drawers so I can slide in some drawer runners.
my question is this...
where can I get some GOOD quality runners from, something about 1000mm long. I purchased...
It does take a fair amount of time and effort, however money is the biggest killer for most, so i try and do everyhing myself.
tell you what... it didnt look that deep except i didnt expect that amount of mud lying under the water
I didnt really want to start cutting the truck up just for a set of tyres. Not alot stops her now thou. (Only thing i found so far was a huge bog hole with 5 feet of mud under 1 foot of water that i...