Thanks for the help.
Problem has been found. I removed the dizzy and pulled it apart and scuffed back the steel disc that slides into CAS it had a little bit of corrosion on it which must have been...
Type: Posts; User: PatrolOwner69
Thanks for the help.
Problem has been found. I removed the dizzy and pulled it apart and scuffed back the steel disc that slides into CAS it had a little bit of corrosion on it which must have been...
Those thing have been checked if not replaced. Tachometer sits at 4 grand when revved slightly. engine light also flashes.
Cheers,Bailey
Hello everyone, my tb42 efi idles good but as soon as you rev it up a bit it will start crackling and backfiring through exhaust . Has been retimed multiple times and is set to about 12 degrees BTDC...
Gotten it to run a bit better and is timed to 15 degrees btdc. And it still won’t idle properly and seems to be running pretty fat. Is there a way to adjust fuel mixture?
Update:
Retired it several times and now it will rev up but still won’t idle and is hard to start and every now and then when I go to start ya go jumps everywhere and starts backfiring again....
Cheers guys will retime it, it happens at idle and won’t rev out
Brand new pump mate
Straight petrol and brand new injectors
Hello,
Just recently got my tb42e started and it is running like an absolute dog, backfires out of exhaust and intake and won’t rev up.
Would anybody have any ideas?cheers
Have fuel at injectors and sprayed some start ya bastard down it’s throat but still no luck seems to have spark so I’m all out of ideas
Update-wired up old starter again and miraculously cranked over now it’s just having trouble starting 😞brand new fuel pump,brand new injectors,brand new plugs,cranks over quick and have checked for...
Thank you, will check cable integrity tomorrow. Have got earth from battery,body,block. And have all dash lights and headlights it just won’t crank over, even turned motor over by hand to make sure...
Hi all,
What would be causing starter motor to not even spin.have checked battery is charged, fuses replaced, wires are connected properly to starter have even tried using a different starter...
....
Anyone?
Hello would anybody be able to post a pic of the cable tower thing that is located near fusible links under bonnet.can’t seem to find any pictures or diagrams of this.
Will have to dig deeper into the harness.thanks anyway
New to forum and not sure how to post pic of battery lead/fusible links
Hi,I made up a simple cable to bypass factory cable and it just blew as suspected and can’t figure out why as can’t find anything plugged into the wrong plug.would there be anything causing this to...
https://patrolapart.com.au/product/fusible-link-gq-single-greyblack
Would anybody have any pictures of how their fusible links are setup.can’t seem to find any pictures of battery leads/plugs...
Can’t get any at the moment but I can find the exact thing on patrol apart for $23
Is the standard fusible link buggered now or does it just blow a fuse somewhere down the line?
Cheers
I have checked and the fusible link wasn’t connected but when I connected it up it started to smoke
Yeah brand new battery and has been tested on a td
Ok will have a look tomorrow,yes battery hooked up correctly and earthed from chassis to body and body to engine
Hey guys have rebuilt my GQ (tb42 EFI) from the ground up and I have put the battery in and nothing happened .power to the starter motor(checked with multimeter) but no power to anything else turned...
Hey everyone I’m new to the forum,I’m currently building up a 1992 GQ patrol that has a tb42 in it that is being converted to EFI.
Cheers,Bailey