Search:

Hi all, ended up being the fuel pump.

For anyone else with a similar problem a simple test is to pull the fuel line off the top of the fuel filter. Attach a pipe to the top of the fuel filter and...

Hi all, ended up being the fuel pump.

For anyone else with a similar problem a simple test is to pull the fuel line off the top of the fuel filter. Attach a pipe to the top of the fuel filter and...

Thanks for the reply PeeBee.

I did try leaving fuel cap off but didn't seem to make a difference.

Looks to me that the fuel cap is the negative pressure relief for the tank. What I meant to say...

So, I have a breather which goes from the top of the tank to the filler flange which I assume is to assist with allowing air to escape when filling the tank. This line is breathing fine. The Fuel cap...

Thank you, PeeBee and Mudnut. I'm hoping it's something as simple as this! The Old girl stalled at a set of lights a minute down the road from home this morning, So its progressivly getting worse.
...

Thanks mudnut, I haven't had a carby kit put through it or thoroughly cleaned it in last 40k apart from a bit of carby cleaner down the throat of it. That aside the car runs well expect for those two...

Hi all,

Having a bit of an interesting issue with the GQ RB30, I'm hoping someone may have had occur to them or may know what's the cause..

The car stalls / seems to run out of fuel when...

Hey,
Having fast Idle issues on a Rb30 GQ.

Does anyone have a photo of where the white plastic piece (that sits above the throttle cable) should sit? Seems that if i press down on this the idle...

Cheers Mudnut, Does sound like a airlock.

I'll spend some time on burping and bleeding the system tomorrow.

Hi All,

I have tried searching but haven't found what I'm chasing.

This afternoon I replaced the Radiator on the GQ RB30. After taking it for a spin 15 minutes or so the temp gauge was at about...

Noticed more power, especially on long highway inclines.

The heater grid i assume has been gutted as the plug was not plugged in when i bought it. I'm having issues with the carby at the moment...

G'day

Owner of a GQ RB30 97 manual from the sunshine coast. Looking forward to becoming an active member of the forum.

Overall she is mostly stock, owned it for 18 months or so.

Here she...

75785
Got it sorted in the end. I cheated and ended up using a local bloke from Mobile Thread Works (http://mobilethreadworks.com.au). Highly recommended.

Thanks again all for your help

Hey Dom14, what ended up being the issue in the end? The Fuel return solenoid or pump?

Thanks you once again for the reply's all

So here it is in all its glory

73973

After this stud i have another to remove..

What about welding a nut onto the stud? I don't have a welder but...

Well, Broke an easy out in the bolt I was trying to remove from the cylinder head. Pretty much at my tether with this thing.

Idea's on removing a broken easy out?

Diamond Tip hole saw, carbide...

Thanks Dom14!

Great bits of info!

I hadn't heard of maniseal. This looks like just what I need, and as you say and a bit of exhaust wrap. It's a bit tricky getting the GQ to the shops without...

Hi all,

chasing extractors to suit a gq rb30. Preferably with a flange to bolt up to existing pipe.

Im on the sunshine coast..

cheers

Cheers for the reply's.

Dom14 the existing manifold looked to be leaking from the gasket and the EGR pipe fitment and not from this newly found hairline crack which is visible from the outside...

Hi Mudnut, thanks for the reply. I will head on over to the intro's area Cheers! I will try to hook it back up, just not sure if new extractors will have a hookup for the pipe.

Just wanting to...

Hi All,

First post here, I have tried searching but can't find anything relating to this query.

I have just removed the Exhaust Manifold off the GQ RB30 as it was leaking / noisey.

The...