Search:

yes thats possible thanks for that. i wonder if the chassis bracket is not out of shape too cause the bushes are not even 3 months old and the car is doing only normal road use . but when i got that...

hi all i have a little problem regarding my front panhard rod bushes. replaced them not that long ago and i found at that they have the tendency of sliding outside of the tube wher they fit. they...

hi guys. gee the 2.8 turbo diesel is going well. i am french living here in australia. you can have a 4.2 'essence'' but not recommended for thats stuff. pretty firsty.
autrement tu as le choix du...

hi neixian. if its like a normal 4wd light showing on the dash, you need to get the car moving forward to engage the gear. if you sit there, the ''order'' to lcok in is there but nothing will happen....

found the problem guys. first like mark said, i checked the diff oil. diff was correct level but oil was a bit to liquidish to my licking. drained it and found out that the seller put some engine oil...

hi mark n mud runner. thanks for your advice guys. i bought that car few years back. its a standard 92 gq ti that i want to keep in its original condition, as thoses beasts are getting rare...

hi guys i have a 92 gq ti lwb. i have replaced all the bushes on the car but i can still feel some vibrations or bumpy ride on irregular roads.
taking off cornering after complete stop generate a...

yes thats right. and no Col, its not a stupid question. if we all knew everything, we will probably be doing something else...bloody is right. its the oil inside the fan(clutch) that makes contact...

yes possible mick i know that its the air flow that goes on the head of the clutch and the little metal strip that makes the thing engaging or not....

hi mick thanks. yes mine is running very often but comes off is the engine is running on high revs, like is disengaging due t excessive speed. i read that it could be a blockage in the radiator.that...

hi mate seems like your engine timing is completely out of wack...

its brand new so the problem is not from the viscous..something else makes it running or the fan is out of balance..thats my problem..seems easy but its not ha ha ha thanks anyway

you dont really need the canister. you can send the canister one -from it-to the inlet air intake.
the most important is the dizzy one. you can plug the rest. and have to plug the rest otherwise the...

hi guys.
the viscous fan behind my radiator on my gq tb42e is running very often. replaced the fan clutch but still the same. tried with no thermostat to keep water cooler but still the same. its...

hi kev. larry again. i forgot to mention you that it was a normal mechanic who did the cleaning. he basically removed 1/2 the plenum chamber-top- and then removd the common rail. he replaced also the...

hi kevin larry here. had the same problem with my tb42efi. checked everything, fuel pump, air flow leaks etc.. the problem was only dirty injectors. the crap sits on the needle and it or they leak...

hi glen go to ebay and get an aftermarket one. yu just hve to modify a bit the rubber where the original pump sits, on its ''cage'' at the bottom of the sender. then straight forward. need also to...

yes shaft had the same problem on an mk 3.3 td as soon as the pedal was pressed heavily, was struggling. check that little strainer as i gets all the crap from the tank and reduce the flow of...

ok guys found the problem. replaced an engine mount but that wasnt it. when having a look underneath to try to get rid of the problem, i got a torch and inspected everything.there are not too many...

one of my main concern is that i could feel the vibrations when putting my hand on the front tyre, car at idle...mean that the vibrations are escaping from the engine to the diff through a...

hi parksy..yes im removing the bracket from the block anyway, easier i reckon cause its pulling a bit on radiator hoses. ill have a test drive to see if there is any difference.. i replaced the...

thanks guys. yes im doing the driver side engine mount pain in the ass though as have to lift the engine quite high. probably going to end up removing the bracket from the block instead of trying...

hi parsky . what i feel are vibrations form rolling i mean so i have play somewhere. there is only one engine mount i havent replaced yet, the one below inlet manifold battery pipes etc..a pain in...

hello all. come back again to seek your help.:1087:im rebuilding a gq wagon with tb42e engine. done injectors and a big part of the suspension.
new bushes on drive train and chassis included chassis...

hi thomas dont get what your problem is ? engine is running correctly and revs up but yu seem to be lacking ''transmission'' is that it ? like yu press on the pedal but yu cant feel the power...