Its a tigged one. I replaced it about 10K ago. But it was leaking.
Sent from my HTC_0PJA10 using Tapatalk
Type: Posts; User: Snow Patrol
Its a tigged one. I replaced it about 10K ago. But it was leaking.
Sent from my HTC_0PJA10 using Tapatalk
Checked all the hoses all good. Nipped up the turbo hose clamps as well. Some were a tiny bit slack. Anyway the news is good. Pressure is back up about 18 psi. Could have been a very small pressure...
Yep that's all done. Beginning to think now I may have a leak somewhere. Can't seem to get boost back over 15 psi. Will have to investigate. Intercooler was recently replaced btw.
Sent from my...
Yeah it did go into limp yesterday. I should have mentioned its a CRD.
I live at about 900m above sea level and have my Dawes valve set to about 16 psi. I notice when I go down to the coast that reading will increase to as much as 18 to 19 psi. Now I know that...
Just fitted a Navara d22 scoop to the beastie. Was cheap from a wrecker and came in the right colour. EGTs are down about 50 degrees C. and it seems to cool faster after a bit of a work out. Its...
Sorry Mullet_hunter and Rossko haven't been on for a while. Kind of got caught up on other things. Drawers not sure but they came out of the Prado we had with very few mods as did the cage. Shelf is...
I have one of those 13 mm Taps as well and its leaked from the start. I ended up putting on a short piece of vinyl hose and jamming a spent .410 shotgun cartridge in it. Hasn't leaked since.
Ended up dropping boost back to just on 18 PSI. Went for a drive up to the Outlaws on the weekend and got a limp mode at a bit over 20 psi on the freeway which caught me by surprise. I did have my...
My primer bulb is never firm. Unless of course I pump it up. I have installed a second fuel filter however this has not changed the situation one way or the other. My Prado lift pump on the fuel...
Gday Mat. Best Patrol forum on the net
Thanks Guys
I was just wondering/ making sure I was in the ball park I guess and making sure I wasn't going to do any long term damage. I took the troll for a drive again with the boat on when it...
Gday Everyone
I am just wondering what kind of boost pressures folks are running in their CRD patrols after a NADS/Dawes and Needle valve installation. I have mine set at 19 psi peak and about 11 to...
G'Day and welcome Brett. This is the place to have all those questions answered. Best patrol forum on the net
I run a full blanking plate on my CRD. It throws the odd P0401 code so I purchased the cheaper Scangauge e to reset the engine light. Host of other useful features in the Scangauge which will keep an...
Hey Rocket. Is that a earth from body to frame??? I havent seen that one yet. Might do that to mine. What does it help with?? Great looking build so far.
Gday Beucam
I got a Scangauge E not the II have a look at www.scangauge.com.au. Then goes to a company call Ample Outdoors in Lithgow NSW. Ordered it Thursday night , in the mailbox Monday morning...
51735
What else would you do on a dune.......?
Youngest son cutting loose and just about to fill his pockets. Not 100% sure where....
My Scan Gauge e arrived today. I can now reset that bloody engine light and tell how many carbons I have made for the day. That T van looks the business Cuppa
Scan gauge arrived.. Love new toys... Code was a P0401 blocked egr....silly computer.
Got my Dawes setup just right..... very happy.......
I have just fitted EGR and Dawes set up and gauges to my 08 CRD. Previously fitted catch can and second filter/water trap. Scan gauge will arrive next week to clear the check light:icon_bonk: The...
Recently I had to remove my turbo heat shield to fit a pyro bung. The shield came off with not to many swear words but more than filled the swear jar when it came to be re-installed. I ended up...
Can you put me down in Cooma NSW please.
I wish it were that easy mudski. Nearest Supercheap is light years away, and as for the local dealership.... less said. I will sort it out some how. Still looking at a Scangauge. They have some neat...