The kits are optioned up like crazy, simply select which one you want, some are twice the complexity. Its all 4mm pipe and the only weakness V the strength is there are 3 mounts , so I have purchased...
Type: Posts; User: PeeBee
The kits are optioned up like crazy, simply select which one you want, some are twice the complexity. Its all 4mm pipe and the only weakness V the strength is there are 3 mounts , so I have purchased...
Thanks for reminding me Darren, I have one of those also, bugger, would have been done in 15 minutes. Those tom thumb units are a bitch.
Looks like I am up for a new or remodelled interchiller tank. The location of the tank outlet was deliberately put at 1/3 off the bottom of the tank to reduce any drawdown of crap into the pump...
Looks great, very neat, well done.
Interchiller wiring finally resolved, bigger cables, big relay, runs beautifully, see if it delivers, swapping out the water or glycol this arvo.
The heat exchanger is on the rear of the fridge, the jackets provide the insulation to the sides and top.
Sorted the Interchiller pump out today, conductor size and volt drop. Rigged up a 200a/hr lithium and short heavy cables, fired the pump up, guaranteed 40lpm by the flowmeter thru the system, happy...
Its the price we pay for the dickheads who put the poor money managers in charge of the bank. Our 15 acres in Gippsland costs 4k in rates for a cow paddock without any physical services and a dirt...
Where did you source these bins? I ran these in my original susyem and they are great, but local Bunnings stopped carrying them, and everything else apart from some $0 tubs in a single size work.
Who is this directed at?
Another good optimisation, thanks.
Thanks Mark, yes that will work also, sealing it up has some issues if the welds crack or I dont do a good job on the checkerplate. I dont need the weight as you mention. Back at the computer again...
No just the packing, all loose, tacked them together today, took 20 mins, after spending 7 hrs fighting with the interchiller pump, that has now been 100% confirmed as dead - pumped at 40lpm with a...
2 hrs transferring 4l of hydraulic fluid into the hydraulic winch tank, holy shit that pumping is hard work under the car. reconfigured the interchiller pump circuit back to standard, still a few...
Yes it's what sold me, I look like I can stack a large and 2 stalls on top of each other as two large are too tight it looks. Anyway will see, they have some good options, as do the expeditions
Procrastinating about the format of the rear pod, bit the bullet today and bought the starter pack from TRED, which has a 55L and 2 x 27L units. Combo seemed to work a bit better than the Expedition...
Slider kit finally arrived after 6 weeks - they must have been busy. Looks a good kit, precision made, all notched, just need to weld then paint, happy days. Going to plate top and bottom using the...
You can get these clips on ebay or via Patrol a Part, not expensive at all.
I purchased a unit that takes a plastic 30l bin, on the basis the last one ended up a pigstye with food and mud etc - will see how that works out I guess.
Unscrew and unbolt all the window track assy then lift the glass out vertically thru the window slot - the gap will increase to around 25mm and its straight forward, even safe enough with window tint...
Priorities and responsibilities, nothing more. Walking away will degrade the delivery program and put the site at risk. I won't do it. Simpson Desert isn't going anywhere, can do it later. Holidays...
Was always on the cards, this place is out of control, and very reactive. Lots of delays in baseline data supply, financial release, contract awards processes of 8 months - stupid. I now have a log...
Barlows are OUT. Project work collision on site, 3 major activities to execute before August, cant get away. Not happy.
I think that failure was beyond a welder?
Have been using this for the last 3 yrs on site , especially after the wet when the flies and mozzie population explodes. Used in combination with a fly net and happy days.