Search:

The heat exchanger is on the rear of the fridge, the jackets provide the insulation to the sides and top.

Sorted the Interchiller pump out today, conductor size and volt drop. Rigged up a 200a/hr lithium and short heavy cables, fired the pump up, guaranteed 40lpm by the flowmeter thru the system, happy...

Its the price we pay for the dickheads who put the poor money managers in charge of the bank. Our 15 acres in Gippsland costs 4k in rates for a cow paddock without any physical services and a dirt...

Where did you source these bins? I ran these in my original susyem and they are great, but local Bunnings stopped carrying them, and everything else apart from some $0 tubs in a single size work.

Who is this directed at?

Another good optimisation, thanks.

Thanks Mark, yes that will work also, sealing it up has some issues if the welds crack or I dont do a good job on the checkerplate. I dont need the weight as you mention. Back at the computer again...

No just the packing, all loose, tacked them together today, took 20 mins, after spending 7 hrs fighting with the interchiller pump, that has now been 100% confirmed as dead - pumped at 40lpm with a...

2 hrs transferring 4l of hydraulic fluid into the hydraulic winch tank, holy shit that pumping is hard work under the car. reconfigured the interchiller pump circuit back to standard, still a few...

Yes it's what sold me, I look like I can stack a large and 2 stalls on top of each other as two large are too tight it looks. Anyway will see, they have some good options, as do the expeditions

Procrastinating about the format of the rear pod, bit the bullet today and bought the starter pack from TRED, which has a 55L and 2 x 27L units. Combo seemed to work a bit better than the Expedition...

Slider kit finally arrived after 6 weeks - they must have been busy. Looks a good kit, precision made, all notched, just need to weld then paint, happy days. Going to plate top and bottom using the...

You can get these clips on ebay or via Patrol a Part, not expensive at all.

I purchased a unit that takes a plastic 30l bin, on the basis the last one ended up a pigstye with food and mud etc - will see how that works out I guess.

Unscrew and unbolt all the window track assy then lift the glass out vertically thru the window slot - the gap will increase to around 25mm and its straight forward, even safe enough with window tint...

Priorities and responsibilities, nothing more. Walking away will degrade the delivery program and put the site at risk. I won't do it. Simpson Desert isn't going anywhere, can do it later. Holidays...

Was always on the cards, this place is out of control, and very reactive. Lots of delays in baseline data supply, financial release, contract awards processes of 8 months - stupid. I now have a log...

Barlows are OUT. Project work collision on site, 3 major activities to execute before August, cant get away. Not happy.

I think that failure was beyond a welder?

Have been using this for the last 3 yrs on site , especially after the wet when the flies and mozzie population explodes. Used in combination with a fly net and happy days.

They are great, bought one in 1988 and yet to use it in anger apart from rooting around in the backyard testing it. I see yours has a gas bottle - must look at mine to see if it has that flexibility...

The parts interpreter can also be incorrect - dont give up, challenge or go elsewhere.

I would recommend before application of the anti rust system that you thoroughly wash the area with a rust converter product - plenty on the market - Bunnings have a suitable one, as this will arrest...

Swapped out the Aeroflow Lift Pump to the carter Black today, was a journey of differences, but 4 hrs later all done with new mounting configuration. I have heard a lot of people saying the carter...

From memory, which is fading it dropped from 2200 to 1750 or there abouts. Thats about 19% which seems a bit high, however with the torqu you have it should be ok. make contact with them.