Hi Steve. That would be great if you could and yes it is 3 ltre or at the moment a 1.5ltre smoking train.ha ha. The other thing that worries me now also is that the actuator on the turbo is open at...
Type: Posts; User: Claude
Hi Steve. That would be great if you could and yes it is 3 ltre or at the moment a 1.5ltre smoking train.ha ha. The other thing that worries me now also is that the actuator on the turbo is open at...
Hi all, Checked what I could in wiring and cleaned the electrical plugs again and no differance. Took for a drive for about 2 hrs and up came engine light again. now when the engine light is on and ...
Thanks for that Steve. will look at trailer plug too. I'm going to disconect every thing one by one that was put on after new moter and hope this doe's the trick. Other than that taking the bulb out...
It would be great,but I'm in QLD, sorry bit to far.
hi all,Had a bit off a look at all the blugs and wiring and sprayed them all with electrical cleanner and no diferance,but did notice that now the actuator on the turbo is open at all time. It has...
Thanks a heap for that info, i also was told today that it could be an injector problem. I will have a look at the electrical side on sunday and see what I can find. Thanks all and I will let all...
Hi all again, well had trouble with low to no boost. well now I have finally fited a pyro gauge and boost gauge and 3' exaust. truck now boost to 15psi and seems to run ok and give me no trouble but...
Hi Tony, I have adjusted that grub screw today and it made a bit of diferance but not that much.It seems to pull ok in 1st 2nd and 3rd but lags in 4th and 5th. I'll take it for a run on the week end...
Ok I'm with you now. we adjusted the actuator rod.[I did'nt see that grub screw] I will try that grub screw tomorow if I got time and I will let you know how I went. Tony thanks a heap and will get...
Yep Tony got your pic thats it and thats what we had a play with. That adjusment in your pic.
Sorry mate mighten be a wast gate then. It's the vacume rod between the intake and exust of the turbo. SORRY I hope this helps. but it is the same as the one that came out except this one isn't water...
Ye mate done a code test and every thing is good, we did have a bit of play with the wastgate adjustment and only did a bit of diferance witch I thought it would as I'd say the ecu has taken over.
Hi YNOT, You think that somthing could be blocked.
Hi YNOT, You think that somthing could be blocked to stop my boost from going higher.
Hi all, No such luck. I fitted a $347.70 air flow sesor.[I think it must be a gold one. ha ha] anyway it did improve a bit. And I fitted a boost gauge and I wish I hadn't, under full power it goes up...
Spot on mate, great post.this is going to help me a dam heap. Thanks mate.
Should have time tomorow to buy a boost gauge and see what it tells me. I hope by this weekend it is all good so I can get out there and chew some hills and mud.
Thanks to all and that will give me somthing to do on the weekend, I will replace the air flow sensor for safety but the old motor went like a freight train. It was pulling a 21 ft off road caravan...
Hi Macca, I have allready cleared codes and also checked leaks.I went as far as pulling the timeing cover and re checking the fuel timing and valve timinng. still no go. thanks for that and I have'nt...
Hi all,hope all is well and all nissans still going strong. Been a while herehbut still here. Ok have a bit off broblem with my old 3ltre. She blew number 4 last week at only 300.000 km. just run in,...
Hi all,long time not on here hope all are fine and trucks still going. My old 3ltre just blew nunber 4 piston and only done 300,000 km, JUST RUN IN, ha ha. Any way just gave her a new motor new...
Hi Simon, Don't feel bad mate, my old GU 2001 is just off the 300 thou too and she still goes hard and uses no oil at all. there not a bad motor just keep up the service and i think we might reach...
Thanks mate.
Hi all, I live in Gladstone QLD and I own a 01 patrol and love the off road.Hope I can help some people with there trouble as well.
Sorry all will do. this is all new to me.