I have a stainless Outlaw4x4 exhaust. 2.5in dump into high flow cat and 2.75in back all mandrel bent. $1,050 installed by Right Price Exhausts at Moss St Springwood. Really happy with it and...
Type: Posts; User: coiled
I have a stainless Outlaw4x4 exhaust. 2.5in dump into high flow cat and 2.75in back all mandrel bent. $1,050 installed by Right Price Exhausts at Moss St Springwood. Really happy with it and...
Thanks for post. Which kit did you use?
Let me assure you that this is a more common issue than you think. I know friends with the exact same vehicle and mods that experience no similar issues, and others with the exact same issues. My...
I have a 2013 Y61 that has the traction control in it and have done almost 55,000km in it. It is lifted a smidge over two inches, on 285/70R17 has bull bar & winch and 95% of the time roof racks &...
I have a 2013 and love it.
I am using Hema Maps and Wikicamps with reasonable success. You can download the wikicamp data for offline access. For a total cost of $130 I think it is a very good compromise compared to cost of...
More stock must have come in. Ours is in getting it fitted as we speak but were told about a week or so ago that they were out of stock.
I was planning to do it in 2015 as my annual leave already has other commitments in 2014. Sounds like I may need to reevaluate my priorities.
I am not their mark, having just bought a brand new Y61 for all the reasons not to buy a Y62 or 200 series but I think they have some merit and place in our market once people reprogram. Reading...
Yes mate, stock tyres & the springs as listed from the King Springs standard parts list as raised which is typically 2in depending on vehicle loads etc. I bought the OME sway bar mount lowering kit...
Well I went ahead and installed the below selecting the heavier dampening option for the shocks of the two available from OME. Self install was an easy enough process that only took a few hours with...
Drewboy, Don't take this the wrong way but do you have a problem? I hear what you are saying about OEM and don't disagree as I deal in this all day everyday too. Being comfortable with the brand has...
Thanks for responses.
So does anyone have experience using the King Springs listed below?
Front - KDFR-42HD
Rear - KDPR-58LP
Drewboy, partly being a tight @r$e as the OME will cost about 40% more. I have been for a full tour of KS manufacturing plant and am quite impressed with the quality of their design & manufacturing...
Hey All
After reading the various threads and speaking to a few people I have come up with the below spring & shock combo which I can source for about $950 supply only. This is to go on a 2013 Y61...
You could buy a brand new Y61 ST and fit that for less than what you can by a new GXL cruiser for and at 15-20l/100km is likely to be more economical!
Hi All
Just wondering what recommendations people have for window tinters in Sydney and preferably (not mandatory) based in the inner/mid west area.
Thanks
Hi Bill
Welcome to the forum! Great truck you have there!!
G'day & welcome to the forum mate!
Welcome to the forum! With the skyline engine, drive it like you stole it ;-)
Welcome to the forum.
The old man had a 2004 3L DID manual which he only sold last year. It was as reliable as the 5 GQ 4.2s that we had before and along side it so don't stress too much.
Gday. Welcome to the forum! Lots of info here
Welcome to the forum. I almost bought your car in baby poo yellow many years ago as my first car. Have fun and get posting so you can access the manuals!
Welcome to the forum. If you can't find it or get a response to it here, it probably isn't worth knowing.
Welcome to the forum! You live in the best part of this country - SA!