super cheap auto has a brand called ridge ryder, another option for you, i dont know what they are like though
Type: Posts; User: Fireblade
super cheap auto has a brand called ridge ryder, another option for you, i dont know what they are like though
hi dont know if you'll see this but curious how you went with this as id like to know whats involved in doing it.
sounds fair,
things to note on the 3.0L crd engine
the exhaust manifold is common to warp and snap studs. it will cause a squeal under acceleration. fix is replacing the manifold and all the...
id say get a 3.0L crd about 2008 or newer, the older 3.0L Di were know for issues.
alot of people like the 4.2L simple and reliable but abit slower from what im told
what have you found?
number 2 is the FPRV and number 4 is the banjo bolt
thats correct
i would like to do that but concerned about over pressure.
looks to me like a TJM bullbar, the design is the same as my tjm bullbar on my MK triton 1999
to me they are both easy and simple tests, but from experience i feel its going to be the fprv. i may be wrong. leak back test is a good thing to be done anyway, cant loose by doing it.
has the fuel pressure relief valve on the rail been tested?
i linked a test method for you
note: you cant buy the valve from nissan they want to sell a complete rail you'd have to buy a bocsh on...
id be thinking glow plug relay (near the drivers right knee abour the fuse box)
or fuel pressure relief valve it might not be close allowing to build pressure, how does it start if you have it...
i work in a nissan workshop and have seen many failure like this, also happened to my 2008 crd 3.0L
egr pipe can crack need the manifold, just replace the pipe with new gaskets
manifold can warp...
something about this doesn't look stock.. cant put my finger on it though
if you do go ahead with this id be interested in your verdict because on paper it looks like a good mod.
Hi see images
82099
82100
i dont know the brand i got it 2nd hand i fits a full size n70zz battery though
see how i fit mine. 2008 3.0L crd been like this for 40,000km without an issue.
81948
mine is fitted like yours njrqs i can try get a photo later
use an angle grinder or dremmel and cut a flat slot in it. then use a flat screw driver to try turn it out
the heat from the grinder might help to.
not saying it will work but that method has...
i agree the oil is from blow by and catch can will stop the oil being there in the first place but the fact the oil is getting oil means there is a leak and also would be loosing boost air to.
catch...
test the fuel pressure relief valve i have a post on it
http://www.nissanpatrol.com.au/forums/showthread.php?43966-Zd30-crd-rail-relief-valve-test-and-replacment
maybe loose turbo hose clamps or there might be a hole in the hoses.
or a hole in the intercooler.
if it were me ide clean it all up and tighten the clamps and look for any obvious hole the the...
i used a screw driver from 4wd super center like the one bellow
i pushed in so the tool wouldn't slip while also using a spanner on the end to get alot more force to turn it.
this method has served...
interesting, i might give a gates belt a shot in the future.
thanks
hi all,
so some time ago i heard a chirping noise turned out to be the alternator pulley so i replaced it and while had it off i thought why not put a new drive belt on it.
tensioner assembly is...