Search:

Hi Guys,

My dad has just purchased a 1998 GU TD42 DX and needs to replace the fan as there is a crack in the center of it. Two questions:

How do you remove of the fan shroud to get the fan...

Looking for a roof rack - want full length tradie style or would also consider a full or 3/4 cage type rack. Alloy or steel. If you have one that you wanto sell on let me know. I am in Geelong, Vic -...

Go for it mate - its not as difficult as it may sound. Take your time and don't give up on the getting out the old axle seal or swivel bearings out and you should be fine. Took me most of one day for...

Yep nothing wrong with globes - ill check the trailer plug wiring tomorrow. Hope that comes up with something. I do have the bull bar indicators - i think ill disconnect them too and see if that...

Hey guys,

Im having an issue with my indicator fuse blowing intimidatingly. I thought id solved the problem with fixing a little bit of exposed wire on one of the front indicator leads. Turns out...

Job done - found a good hub at the wreckers for 60 bucks. Thanks for your help with the job guys.

Yep i reckon ill be replacing it. What do you think of the after market hubs? They seem to be cheaper than nissan ones. Like all after market there is some dodgy ones out there im assuming. Any one...

No brand or marking on it. it feels like a hard plastic or lite metal casing. strange. im thinking someone broke the original and put it on to keep it working. the circlip was not on the outer axle...

Spins on both settings... Its more like a fake hub. seems more like a hub cap to me.

This is the inside of the black one. Any ideas?

The hub from the out side bellow - i think the black one is the incorrect one - whats your thoughts?

On closer comparison they are totaly different hubs - the RHS doesnt have the clutch thingo and is a different shape casing and not the same setup on the inside. Ive got photo im trying to get up....

Doing the RHS (short side) and i noticed there was no circlip and the hub is different on the inside. cant put photos up unfortunately. it doesnt slide in and out when you twist the lock/ unlock...

Thanks guys got it out with a two lots of bent pliers. worked ok. All sorted one side and back together. Tomorrow the other side. Feels good to have done it. Turns out mine has been converted to GU...

I have been on this job today and all is apart and fine other than removing the axle oil seal. I removed the swivel housing races and cap no problem. How do you remove the oil seal? I wanto get it...

Ok well this is the weekend that things are seeming to happen. Picked up a LRA Aux tank today second hand. I dont have the twin filler and am doing this project on a very fine budget so i wanted to...

I have just got the kit for my GQ to do the complete axle seal to wheel bearings including king pins and all the seals. I have read the Pictorial post by Tony which has been a great help and i will...

I gave up when i read a book by Alan Car (easy way to quit smoking) worked for me. Id smoked for 10 years and tried to stop many times. I'm quite active and at the time of reading i was at the end of...

Great pictorial, Thanks - do i need to buy a kit if so what parts do i need in it? I will do both sides while im at it. How do i tell if cv's are ok? should i be replacing those too?

Hi Stephen, Ok that makes sense i guess - ive got a GQ 4.2 nat asperated so shouldnt be a problem - do you think there is much, if any advantage using a unifilter?

Welcome. Just joined myself and getting some great feedback already. Great forum. Get into it.

Welcome. Just joined myself and getting some great feedback already. Great forum. Get into it.

Welcome. Just joined myself and getting some great feedback already. Great forum. Get into it.

Welcome. Just joined myself and getting some great feedback already. Great forum. Get into it. Where abouts in Tas? Bloody nice state. If you need any advise on tracks give me a shout.

Welcome. Just joined myself and getting some great feedback already. Great forum. Get into it.