Hi guys, I have been missing in action for a few years.
I have just upgrade the old 2.8t Gu to a 2016 Y62 S3 Ti, so thought I should come back and do some reading and research and may be offer my...
Type: Posts; User: thin on top
Hi guys, I have been missing in action for a few years.
I have just upgrade the old 2.8t Gu to a 2016 Y62 S3 Ti, so thought I should come back and do some reading and research and may be offer my...
cheers, thanks for that
Ok guys I have my Pyrometer, how far after the turbo should this go.
cheers
Phil
Tony, you were right on the money again, after 2 hours driving yesterday I poped the hood and checked the aircon pipes, they had more ice around them than there beer taps at the local pub. Will check...
An update on my fuel usage.
The Patrol has been the good ladys drive car for last 4 weeks, to and from work, 5 kms each way. Shopping and general runing around 400km at 13 litres per 100km, around...
Great stuff Justin. Dont think I need it at the moment, but Im sure one day I will be reding this again.
cheers
Phil
I would have thought if it had a 2" lift kit, it would have needed a new longer or adjustable dragink
We will be leaving Darwin mid May heading back to the Gold Coast. The good lady wants to go via Alice Springs. I hate driving 1000kms down a road to go some where, then back the same way.
Has any...
When fitting any master cylinder, clutch or brake, you shoud bench bleed the cylinder first, I have never had a problem when doing this first
I will be interested to hear what they find, and also the cost, clutches with dual mass flywheels are not cheap
Strange that its only in First, I would have thought if it was the clutch/flyweel it would be worse taking off in second.
Like Tony says, really need to hear and feel it.
Phil
Wow, this wont look good, but my 2.8 TDi is getting 10L per 100km on the highway since blocking the erg and adding the 2T to the oil
Thanks Tony
I have ordered my pyro and boost guage, they will be here next week. Things take while in Darwin.
Im sure I have seen guages mounted on the windscreen pillar, is there a mounting pod available to...
Thanks Tony, I remember back in my young days as an apprentice fitting pyros to trucks, and the drivers saying they drove off that as much as the taco.
Dam deisels have change, it was easy when it...
Tony, with the 2.8 do I need to be checking the boost pressure and exhaust temp
Phil
Never heard of Tough Dogs, but agree with what ya say :)
Going back a few years I spent 2 weeks with Gabriel in USA, was interesting time going through the research and devlopment, fitting...
Well I have now blanked of the erg valve, removed the butterfly valve and washed out the intercooler and add 2T to the diesel.
So today went for a run up the Arnhem Highway from Darwin east towards...
No need to go to Nissan, Ryco filters are made to OE quality and ther is a fair chance they will be cheaper than Nissan. Most parts outlets will have a choice of filters
As part of my job I sell filters, Compare Sakura filter with say a Ryco filter, and you will see that the Ryco filter has far more pleets of filter paper, so efectivley a greater area of filtering...
thanks Tony
Will check that on next drive. I have noticed that there is always plenty of drips coming off the left hand chassis when I stop, i just have never bothered looking where they start...
Hi guys and girls, my aircon does not work as well as I would like. Yes maybe the gas could need checking, but on a trip, after 2 or so hours of driving there is almost no blow coing from the ducts,...
I bought cd on ebay for $15 a month ago
To windy to go fishing in Darwin today, so took the Mrs for a drive, only took 20 minutes to find a scrap bin with suitable steel to block off the ERG, an hour later thanks to the great drawing on...
Hi Phils the name, recently purchased a 98 GU 2.8Ti, not a bad wagon, but wll be playg with the ERG and the likes after doing some reading here.
Bassed in Darwin at the moment so use the GU for...