Changing to 20-60 penrite resolved my issue!
Type: Posts; User: koliilok
Changing to 20-60 penrite resolved my issue!
My knocking only last probably 2 or 3 seconds at most. I don't like any knocking though.
Oil light goes out at the same time as the knocking stops.
Bought some HPR30 today, will see how that goes.
Hey all,
Lately i've been getting a bottom end knock when i start my patrol until it builds oil pressure. I changed the oil a couple of months ago and i think i put 15-40 in it or maybe 10-40 not...
Hey, Fuel pump in my GQ is cactus, to cut a long story short i have mounted a carby sender assembly into my belly tank as my EFI sender assembly is ruined and i can't use it.
I am going to run an...
Thanks for your reply. I found the buzzing to be coming from the head unit, i have since removed it and ran new power wires to the new one. All the problems are solved!!
Corey
Hey,
i have an electrical issue in my GQ with a tb42e. It started off by making a buzzing noise from behind the dash and the stereo turning off, the buzzing increased with rpm and after a few...
Are you talking about the fusible link that is connected directly to the battery? Pink/red sort of colour wire? I rang an auto elec because I melted mine somehow, he said they are 21amp or something...
Yeah i saw that one, the bar i have now is almost exactly the same, it has the cutout for the fairlead but no actual mount for the winch, i may have to weld the winch bracket onto the bar and...
I would prefer a second hand one, i have a standard steel bar and i have ordered an ebay winch mount bracket just to see if i can make something out of that, an actual winch bar is preferred though....
I know a couple of people that have got BFG all terrains for $200 per corner, i have a feeling they might have been old stock to make way for the new ones. I bought tyres a week ago and was quoted...
Can you get the door trim off from the inside? if you can then you will be able to get to the latch assembly.
Take in a piece of plastic from the interior that is the same colour you want the paint to be, into a paint shop and they will match the colour perfectly. Then either put it in a pressure pack or a...
Door hinges are a common problem, eBay hinges seem to be rubbish but the original hinges can be rebuilt with genuine brass bushes.
If your after a very cheap/free option, XF falcons have a relay block in the engine bay, they all slide together and can be as long as you like.
It looks like the sort of vehicle you would never take off road, purely for city driving really.
Is there any legal implications with cutting the inner guard? I always though you couldn't cut it, looks very good and something i hope to do in the future, providing it doesn't cause any problems...
Hey,
I'm after a steel winch bar for a GQ, i've tried eBay and various other avenues and have come up with very little.
If someone has anything please let me know.
I am located in South...
Thanks for that! i did some eBay shopping and found both in Australia.
Just need some cabling now and a bullbar!
Hey,
i searched but couldn't find what i was looking for. Today i bought a tigerz11 10000 LB winch from the vic 4x4 show, i bought it as the winch only for cheap so i need a control box, hand...
Did you use an aftermarket thermostat? I've heard that the aftermarket one's aren't great, i've also heard of people having no problem with them too. I bought a genuine one from patrolapart just for...
Looks like i'll be either sticking to the strap in the towbar method or i might invest in an insert for it...or people could stop getting stuck and me having to pull them out? lol
Looks like i'll be leaving it well alone, that's not looking strong at all!
Just realised i put this in DIY section, could someone move it to the relevant section?
Sorry...
Hey, was having a discussion the other day with a friend about the loop thing on the rear of a GQ, is it a strong enough recovery point for snatching etc? I would assume it's bolted to the chassis...
I had a similar problem, turned out to be the radiator, runs very cool now.