Search:

All vaccuum hoses are almost new. I replaced them all when I did the efi conversion which was probably 6-8 months ago. Only vac hoses I havent replaced are the thick black ones for the clutch and...

Hi guys, chasing some issues with the tb42e that ive had for a while and hoping someone can shed some light. The problem is it has a miss at idle and when you hold the revs steady at 2k for example...

Hi guys, currently converting my tb carby to efi and the loom I have was from an automatic, and my car is a manual. Ive figured out how to short the inhibitor switch to make the computer think the...

Any idea where from, besides nissan because they always charge a fortune. Called patrol a part today and it seemed like they didn't know what I what talking about..

Located in Vic, but would prefer to buy new if I can find a replacement

Hi guys, just wondering if anyone knows where to buy replacement AAC valve (on the right) and I believe it is the FICD or AIC valve (on the left) Im converting my carby tb to efi and broke these two...

I like the rear bar :D

Gy? If its a 92 then its a GQ. It may be the safari version and that is why you cant find it in the gq book, maybe, just guessing here as I know next to nothing about the safari version :)

Cheers mate. Would you be able to take photos/tell me where each one should go? I'm pretty sure I still have a vacuum leak somewhere as my revs at idle are all over the place, so I just want to make...

Thanks for the input guys! After having a read around the forum I'm thinking about forking out the cash for the amada's as they are rebuild-able, remote res and not a super expensive shock. :thumbup:...

Need new shocks to suit a 2" lift as mine are rooted. Not looking to spend much over 800.

I have been looking on suspension stuffs website and messaged Shane and he recommended the oztec shocks....

All I can say is WOW, what a PITA job. The old gasket was glued to both surfaces and it took me and my brother a solid 2-3 hrs just to remove the old gasket. Almost finished everything, few small...

Found my problem tonight! Was a leaking intake manifold gasket around cyl 1 and the thermostat housing, but it was only leaking on the underside which took alot of messing around to find (even after...

Does anyone have a diagram of all the vacuum hoses that go to and from the carby, and that says what they actually go to? I've search the net and couldn't find anything of use as I have a feeling...

I'll look at doing that probably this weekend. Is there a way to leak test the manifold while it is off?

He said it was tuned more so for gas but even on 25 advance it ran not too bad on petrol.

Bit of an update.. Ran 12v straight from the battery to the coil and bypassed the resistor and then checked all the leads/plugs were firing. Found that while on 12v cyl 2 was firing, however when...

When I bought the car it was running about 25 advance which amazed me.. so I have backed it off to 14 at the moment but I will double check it tomorrow. It didn't seem to make a lot of difference...

Yep, good spark from 1 + 2. Have also rotated plugs and leads around to rule those out. I have a timing light, does just setting the timing prove its firing/sparking at the correct time?



That...

I saw small traces of coolant in their when doing tappets, but only the tiniest bit. Im pretty sure the oil isnt milky as I dropped about 2L's the other night to check that, but I will be doing a...

I've checked for vaccum leaks the other day and couldn't find anything. Spoke to a mates dad who is pretty cluey on engines and he suggested that maybe the intake manifold is leaking @ cyl 1+2 so...

Hey guys having some problems with my tb42 at the moment. It seems cyl 1 and 2 are either not firing properly or completely out of time as when I pull the leads off the engine idle doesnt change at...

Theres a decent looking TD42 for sale in vic with a few mods for 8500 but has 475xxx. I know the td42 are fairly indestructible but is this a bit too high when looking to buy?

I love the deer photos you have!

Few hundred $$$ to save a lot of money, blood, sweat, tears and man hours. I know what I would be doing..