Search:

So question is, I'm looking at getting a 2006 Patrol to do a 4.2lt conversion to.
Currently own a 2004 ZD and want to upgrade in yr and power.
Has to be auto and remember people saying the 4.8 auto...

She's been getting hot under load up hills etc and on the beach so cant be bothered cleaning and flushing a plastic rad so looking at a new one.
Options are Same but new or the all Ally ones....

Back from a trip this weekend and turbo is leaking oil. See pic taken thru the EGT probe.
After anyone with experience in the $5-600 Ebay copies. See alot of 4.2 guys using them but no one mentions...

An idea for you, you can get arduinos to talk to android devices, plus there are now android based double din car stereos... you see where im gong?

Fast and the furious type computer display with...

BUMP..... any more news. Its on my wish list too

I just did all mine with 2mm leds blue from ebay. Jaycar sell them as well. Only prog was pulling switch apart and squeezing a resistor in there as well

I was thinking temp alarm not no water alarm. The sensor would work but this can easy be done with a relay led and peizo buzzer. If you want to use with the arduino a ultrasonic sensor would work...

Ive been using the ebay $300 2DIN GPS units for 5 years now, they are great. Totally up to you but its a 6" screen not 7" and 6 times more expensive for the same thing i have. I would put the $2000...

This would be easy to do. I wouldnt bother with the AC. The input to the Arduino to trigger the alarm will be a 1-5v dv signal. Either converted from the engine coolant temp sensor or a LM35 type...

The Pi is similar just not that common. Arduino stuff is everywhere and all open source code so easy to mod. I used the 16x2 (16 caracters with 2 lines) Ebay or Jaycar for all parts. Still under...

If you dont want to wait 3 weeks off ebay, Jaycar sell them all and are only a couple of bucks. I just did all mine including every switch with single led's. See here...

I made up mine here http://www.nissanpatrol.com.au/forums/showthread.php?13793-Arduino-powered-MFD-Battery-and-temp-display
I just taped the sensor onto the outlet cooler pipe. Runs 60 ish deg most...

Its a bit boat like. You could get one of these and a simple on off switch...

Did this myself yesterday. Should have gone on here first. I got a steamer, hit it for a few seconds and it all came off, glue and all. It was a steamer for household cleaning and the tint was...

Having had several of these and two currently it sounds like no signal from the camera. See if there is power to the camera if ok, then the centre pin of the RCA plug yellow (camera output) should be...

Did you connect the earth lead on your car to the body or engine? If so you may have arced the earth and given a dodgy connection. i would remove both batt connections clean them up at battery and...

I bet that its hot. Look up the #'s on the dpi website. U only need the vin ang eng # if you can find them. Not trying to be rude but as stated they dont come off unless you need them off.

Anyone got any idea what the full and empty fuel tank resistances are? Both tanks in a Wagon. I'm starting on my distance to empty display. I will get the readings for accuracy later I'm just puting...

Yes Jaycar have started selling freetronics brand stuff. Bit pricey like everything they sell, but if you cant wait for eBay, I guess its Ok.

I was looking at dual battery monitors and after not finding much looked further. Also finding out my Patrol hasn’t got real OBDII so are unable to use the cheap link programs went looking at...

Yes it will work, 2" lift with stock shocks. Just not ideal. See ebay, lots of suspension stuff on there cheap

I got my double piston pump installed there. Run to connections front and rear, seems to work fine, shock mounted. Had to move the vac lines but did that anyway as the catch can and dual batt relays,...

Turbotec or United fuel inj. Both @ Redcliffe [airport]. But i would wait and get it from ebay for way less $$$
http://stores.ebay.com.au/kando-dynamic?_trksid=p4340.l2563
Ive used these guys for...

TimE......What did you use to cut the holes? looks quite neat, good job. Ive since run out of switch room too and looking for more.

My rear is in the gap below the rear door and the rear step, dead centre. Bottom of screen is towball and edges are corner bumpers. Front is a ccd not cmos type, and just off centre behind winch.