Mate that's only half a load should of got some roof racks:D
Type: Posts; User: klompy
Mate that's only half a load should of got some roof racks:D
Any security cameras at the bowser.
taking a dump
Assuming you have it assembled correctly I have to grab the axle with some vise grips and pull it out a bit further to get my clips on.Some other diffs I have done have a thread in the axle to fit a...
Bet that cocky could tell you some stories,some cockys I know are rough on gear.
If the nuts at the top put some load on the bottom of the tie rod with a jack if its up the other way put some weight on the top with a big screwdriver or crow bar.
I would go as big as you can definately oner 100 amps.
Makes you wonder where it all will end,its just greed you dont see prices coming down at all.
I removed mine as well seemed to be useless and like you safer than being used in error.
Stainless ones are prone to cracking.
Women are temperamental,half temper half mental.
That would be a cool job.
How would they get that out.
Sounds like loose or worn belts,sometimes people fit industrial belts and they dont fit the pulleys as well as automotive.
You would think the finished paint job would be thicker than spraying so thats a bonus.
Watch for the front wheel bearings coming loose unless you've done the gu upgrade.
Now thats cool.
Hydraulic hose suppliers have a protective anti abrasion and fire sleeve that is pretty tough.
A decent turbo and some fuel pump mods and you will be suprised at the increase in power,and the silver top is supposed to be better for that.
If your happy with the auto hubs source a replacement but if you change to a different set of hubs make sure you know how they fit and get all the bits in he right place,it can be confusing.
Thats classic
They all seem to be Nissan tough so it comes down to personal prefence,I like my factory manual hubs.
It"s the rear ones from the 80 series that fit in the front.
So how do you find this mod is there any down sides like noise or hard steering,thanks Mike.
Thanks for the welcome guys I live in Rotorua Bay of Plenty NZ.Hope thats ok cheers Mike.