Welcome Marty
Sent from my iPad using Tapatalk Pro
Type: Posts; User: Dybo
Welcome Marty
Sent from my iPad using Tapatalk Pro
Welcome TankFreight, great to have you in the forum. Anything in particular that you’re looking to do to your Patrol?
Sent from my iPad using Tapatalk Pro
I’ve just put a bush-style one on the passenger side - I’ve replaced normal ones three times on that side since acquiring the car four years ago.
When I bought it from Patrolapart, the guy I was...
You might be able to get it done without pulling the engine, but I wouldn’t. Honing while leaving the crank in is asking for trouble (either damaging the crank with the hone and/or leaving debris...
Are you on LPG? If so, 20 degrees is not uncommon. 230k isn’t much on these engines either.
I’ve just put rings through an engine that had done 400K - and it didn’t need a bore. I gave it a hone...
Hey guys, I’m looking for an autolocker for the front diff of my GQ - anyone got one laying around that they are looking to get rid of?
Sent from my iPad using Tapatalk Pro
Welcome Bronk!
Sent from my iPad using Tapatalk
Anything is possible, but I would have thought that the rubber hangers for the exhaust would have compensated for a slight twist. Perhaps the exhaust was unbolted when/if the engine mount was...
I wouldn't have thought it would matter. Sure it means a slight change of angle of the engine, but it wouldn't be much. Might lay your gear sticks over tiny bit. The rubber is simply to absorb...
Correct. The only way to adjust the pre-load is by putting in different thickness shims. So, to do this correctly, you'll likely need several different sizes on hand before you start. Patrolapart has...
Cheers MudRunner, threedogs, dhuck and Kimbo. How do I turn on notifications on tapatalk? I didn't get told that you had replied...
Sent from my iPad using Tapatalk
Hey guys, I've been around the forum for a while as a reader - time to start sharing.
I'm a part owner of GQ wagon with lift, custom bars, quarter chop, 33s and TB42 on dual fuel. Why part owner?...
Cheers MudRunner, I'm a member of few forums - easy to miss the intro on the occasional one. I'll duck over now.
Thanks for the advice - any preferred (ie. Cheapest) sellers? I'm in Melbourne.
...
Hey guys, I'm up for a new clutch - has anyone had any experience with Blüsteele clutches? They look ok, but wouldn't mind hearing from someone who has one.
Also the td42 will fit my tb42 won't...
Thanks, but those links don't work unless you're part of the "Out and about 4x4" group on Facebook. So if you can't see them, join this group then try the links.
Sent from my HTC_PN071 using...