Search:

My missus hates the fact i showed her what you got and i want too...

I think FB is more"dangerous" than this...:)

Seen first pic and taught you need wheels.You got them:) Are you radio amateur?You need to be licenced also in your country?
Regards,

LWB...Great!!

Hope you like it:

Running wide tires on my y60 and mud gets on windows.OE plastic arches can not be mounted because of tire clearance.What do you use,easy and reliable?
Thx,

Welcome.Hope that manual will never be used,and have no repairs needed.

Looking good.

What is the pressure you run in your tires?:)

Maybe the important thing was clearing the area,not integrity of the car:)

Like most repairs and upgrades on patrol you make them on your own.If you start building custom bumpers you should know a 2mm thick plate bolted with 8mm screws on the frame will not hold.As most of...

Not true.On petrol engines only a leak down test will show bore/honing wear without taking the head off and measuring the bore with dial gauge.
Compression test will usually show valve problems.But...

Efi all the time,not worry about all mech systems enrichment on cold etc etc etc.

Same thing looking for my rd28t.
From my experience heater matrix hoses go something like that:
One hose on head or block to receive hot coolant and other one on a connection that water pump...

Use something like screws lock tight solutions or similar and windshield silicone for the brackets..

Imagine bad luck of rolling the car in water on the side of the snorkel:)

I think factory or aftermarket hooks are more dangerous compared to a tow bar rigid mounted on rear of the chassis.Seen lots of cars with hooks welded on the front bumper.That font bumper lots of...

Need to check if the heater matrix hoses are in factory locations.Maybe you have a pic with them?There are 3 locations on that side of engine hoses can be put:
1.Cylinder head
2.Metal tube coming...

Lucky you.I am looking for rd28t info..

Regards,

'91 y60 rd28t something like 8l/100km to 16 l/100 km if abused.Strange,offroad it seems tank will never empty:) Accelerating from a traffic light to another seems to eat most of fuel.

It must be checked with dial gauge.On ve bosch that i managed to find info it is under 1mm to just a little over 1 mm read movement of plunger,depending on engine type pump is used on.As it shows in...

Need this info,engine will be ready soon..

Thx,

Thx all!
Will post pics with engine rebuild and parts used in another thread.Things going well,want to do this to be strong engine so sleeved the bores,honed,new rings,new injectors,gasket kit,head...

Could not find any info on setting timing with the dial gauge for rd28t.
Only info i found is the 4.2 engine with ve pump.
Could you help?

Thank you,

Glad to find another forum with passionate owners like i had for long time on other of my loves(i5 2.2l 20v turbo audi engine on any quattro body)
My car is 1991 lwb patrol engine rd28t.
Now in...